Speck BADUJET Riva, Руководство по эксплуатации

Страница: 57 / 227

9 Maintenance /Service
05/2013 VG 766.2330.061 EN 57
9 Maintenance/Service

Always disconnect from the power supply before commencing any
maintenance work. Secure this disconnection.
When? What?
Regularly

Check the pump is not leaking.

Check the stability of the unit All impurities
should be removed.

Check the electrical contacts in general.

Separate potential connector.
If there is a risk of
frost.

During winter, remove the unit out of the
pool. Empty and store it in a dry location.

Only have the pump repaired by the manufacturer or an authorized
dealer.

If the case pf pump leakage, the unit may not be operated and must
be disconnected from the power supply.

After finishing maintenance work, take all required steps for start up.
See chapter 6, page 51.
9.1 Care Instructions
If needed, wash the unit with water and wipe with a moist cloth. Do not
use abrasive cleaning agents!
A few sprays of a cleaning agent especially for the use on acrylic sur-
faces can be occasionally used. Wipe with a clean dry cloth. Heavily
soiled surfaces can be cleaned with warm soapy water or a mild
cleanser.
Lime-scale deposits/water spots can be removed with a mixture of
white vinegar and water. Removal of light scratches or rough spots on
shiny surfaces can be done with the help of a buffing kit found in sani-
tary supply stores.