Speck pumps EasyFit 1.65 THP, Инструкция по установке, эксплуатации и обслуживанию

Страница: 18 / 44

v
5
• Ability to configure freeze protection temperature.
• Ability to view actual speed and power of the V-Green 165 in real time.
• Ability to adjust the V-Green 165 motor speed in 25 RPM
increments (to fine tune flow for certain pool installations).
• Battery backup to store time setting.
3 Quick Start Instruction
3.1 Quick Start Guide
(Using the factory default schedule)
The following table describes the factory default settings for DURATION
and SPEED order:
Pressing the START key will start the V-Green 165 based on the factory
default schedule.
NOTE: If power is cycled to the V-Green 165 and the user does not
press the STOP key, the V-Green 165 will
automatically
start and
run the programmed default schedule shown in the chart above. This
feature ensures that the V-Green 165 will re-start in the event of a
power outage.
Button Duration
(In Hours)
Speed
(In RPM)
STEP 1 4 3100
STEP 2 4 2600
STEP 3 8 1600
OVERRIDE 2 3450
If power is connected to the V-Green 165 motor, pressing any of the following buttons
referred to in section 3 could result in the motor starting. Failure to recognize this could
result in personal injury or damage to equipment.