Speck pumpen SUPI, Перевод оригинального руководства по эксплуатации

Страница: 62 / 84

Installation
20 EN 09|2017
5.4 Electrical connection
WARNING
Risk of electric shock due to incorrect connections!

Electrical connections must always be carried out by
authorised specialists.
 Observe VDE and utility company regulations.
 Install pumps for swimming pools and their protection
according to DIN VDE 0100-702.
 Install a disconnecting device with at least a 3 mm contact
gap per pole to interrupt the power supply.
 Protect power supply with a ground fault circuit interrupter,
nominal residual current I
FN
≤ 30 mA.
 Only use suitable pipe types according to regional
regulations.
 Adjust minimum diameter of the electrical pipes to
accommodate the motor output and pipe length.
 If hazardous situations can occur, provide emergency off
switch according to DIN EN 809. The builder/operator must
make a decision according to this standard.
5.4.1 Lightening protection device
A lightening protection device is recommended for underwater
motors as protection against atmospheric overloads.
WARNING
Electric shock due to overvoltage!
 Build sufficiently dimensioned earth connectors
corresponding to the motor performance and considering
DIN 57100 C62.11 – 1993.