Specialized Turbo Levo FSR 6FATTIE, Руководство пользователя

Страница: 22 / 26

20
ENGLISH
FR
ANÇAIS
DE
UT
SCH
ČESKÁ
HR
VA
TSKA
SLOVENSKI
12.3. BOLT SIZE / TORQUE SPECS
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important
for your safety. If too little force is applied, the fastener may not hold securely. If too much force is
applied, the fastener can strip threads, stretch, deform or break. Either way, incorrect tightening
force can result in component failure, which can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your first ride, and
consistently thereafter, recheck the tightness of each bolt to ensure secure attachment of the
components. The following is a summary of torque specifications in this guide:
TORQUE SPECS (LEVO FSR PIVOTS)*:
PIVOT LOCATION IN-LBF Nm PIVOT LOCATION IN-LBF Nm
MAIN (CARBON FRAME) 200 22.5 S-LINK @ SEATSTAY 130 14.7
MAIN (ALLOY FRAME) 182 20.5 S-LINK @ SHOCK EXTENSION 148 16.7
DROPOUT 113 12.8 LOWER SHOCK MOUNT 175 19.8
S-LINK @ FRAME 96 10.8 UPPER SHOCK EYE 113 12.8
TORQUE SPECS (KENEVO FSR PIVOTS)*:
PIVOT LOCATION IN-LBF Nm PIVOT LOCATION IN-LBF Nm
MAIN 182 20.5 S-LINK @ SHOCK EXTENSION 204 23
DROPOUT 204 23 LOWER SHOCK MOUNT 156 18
S-LINK @ FRAME 204 23 UPPER SHOCK EYE 156 18
S-LINK @ SEATSTAY 204 23
* Apply blue loctite to chainring bolts.
TORQUE SPECS (GENERAL LOCATIONS):
LOCATION IN-LBF Nm LOCATION IN-LBF Nm
SEAT COLLAR (30.9 POST) 45 5.1 SPIDER LOCKRING 443 50
SEAT COLLAR (34.9 POST) 55 6.2 DERAILLEUR HANGER 35 4
SEATPOST @ SADDLE 120 13.5 WATER BOTTLE BOLTS 25 2.8
STEM @ STEERER TUBE 45 5.1 REAR BRAKE GUIDES 6 0.7
STEM @ HANDLEBAR 45 5.1 BATTERY AXLE 88.5 10
CRANK BOLTS 443 50 REAR AXLE 133 15
CHAINRING BOLTS 89 10*
TORQUE SPECS (MOTOR MOUNTS):
LOCATION IN-LBF Nm
LEVO/KENEVO ALLOY (ALL) 200 22.5
LEVO CARBON MAIN PIVOT 200 22.5
LEVO CARBON FORWARD 133 15
LEVO CARBON UPPER 133 15
LEVO CARBON LOWER 200 22.5
CAUTION: Ensure all contact surfaces are clean and bolt threads are greased or have a
threadlocking compound prior to installation.