12
5
BATTERY
AXLE
Fig.5:
Turn off the battery and unplug the wiring harness before removing the battery from the frame!
Fig.5:
While holding the battery, unthread the axle using a 6mm Allen key.
Fig.5:
Allow the front of the battery to drop out of the frame, pivoting at the base.
6
Fig.6:
Pull the battery up from the anchor at the base, then pull the battery completely from the frame.
CHARGE LEVEL DISPLAY
The charge level of the battery is permanently displayed during your ride. The number of LEDs glowing will indicate the
remaining battery charge. When the battery charge reaches 20%, the last two LEDs will glow red
(fig.7)
.
At 10% battery charge remaining, the system will start to reduce the amount of support. At 1%, the system switches
off the motor support.
If your bicycle is at a standstill for at leasy 10 minutes, the BMS will switch the system off. In order to continue riding
with support, you have to switch the system on again.
