1
THIS BRIEF USER MANUAL CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE.
This user manual is specific to your Specialized Epic HT bicycle. It contains important safety, performance and technical information, which you should read before your first ride and keep for reference.
You should also read the entire Specialized Bicycle Owner’s Manual (“Owner’s Manual”), because it has additional important general information and instructions which you should follow. If you do not
have a copy of the Owner’s Manual, you can download it at no cost at
, or obtain it from your nearest Authorized Specialized Retailer or Specialized Rider Care.
Additional safety, performance and service information for specific components such as suspension or pedals on your bicycle, or for accessories such as helmets or lights, may also be available.
Make sure that your Authorized Specialized Retailer has given you all the manufacturers’ literature that was included with your bicycle or accessories. If there is a difference between the
instructions in this manual and the information provided by the component manufacturer, please refer to your Authorized Specialized Retailer.
When reading this user manual, you will note various important symbols and warnings, which are explained below:
WARNING! The combination of this symbol and word indicates a potentially hazardous situation which, if not avoided, could result in serious injury or death. Many of
the Warnings say “you may lose control and fall.” Because any fall can result in serious injury or even death, we do not always repeat the warning of possible injury or
death.
CAUTION: The combination of the safety alert symbol and the word CAUTION indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury, or is an alert against unsafe practices.
The word CAUTION used without the safety alert symbol indicates a situation which, if not avoided, could result in serious damage to the bicycle or the voiding of your warranty.
INFO: This symbol alerts the reader to information which is particularly important.
GREASE: This symbol means that high quality grease should be applied as illustrated.
CARBON FRICTION PASTE: This symbol means that carbon friction paste should be applied as illustrated to increase friction.
TORQUE: This symbol highlights the correct torque value for a specific bolt. In order to achieve the specified torque value, a quality torque wrench must be used.
TECH TIP: Tech Tips are useful tips and tricks regarding installation and use.
INTENDED USE
The Specialized Epic HT bicycles are intended and tested for mountain biking (condition 3) use only. For more information on intended use and structural weight limits for the frame and components, please
refer to the Owner’s Manual.
GENERAL NOTES ABOUT ASSEMBLY
This manual is not intended as a comprehensive assembly, use, service, repair or maintenance guide. Please see your Authorized Specialized Retailer for all service, repairs or maintenance. Your
Authorized Specialized Retailer may also be able to refer you to classes, clinics or books on bicycle use, service, repair, and maintenance.
BOLT SIZE / TOOLS / TORQUE SPECS
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important for your safety. If too little force is applied, the fastener may not hold
securely. If too much force is applied, the fastener can strip threads, stretch, deform or break. Either way, incorrect tightening force can result in component failure, which
can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your first ride, and consistently thereafter, recheck the tightness of each bolt to ensure secure
attachment of the components. The following is a summary of torque specifications in this manual:
DESCRIPTION
ALLEN KEY
TORQUE (in-lbf)
TORQUE (Nm)
DESCRIPTION
ALLEN KEY
TORQUE (in-lbf)
TORQUE (Nm)
1
SEAT COLLAR
4mm
55
6.2
3
REAR AXLE
6mm
133
15
2
DERAILLEUR HANGER
2.5mm
7
0.8
4
WATER BOTTLE BOLT
3mm
25
2.8
CAUTION: Ensure that all contact surfaces are clean and bolt threads are greased or have a threadlocking compound prior to installation.
The following tools are required for assembly of this product:
2.5, 3, 4, 6mm Allen keys
3, 4, 6mm socket Allen keys (3/8” socket)
Torque wrench (3/8” socket)
Cable and housing cutters
High-quality grease
Blue threadlocker (Loctite 242)
GENERAL NOTES ABOUT MAINTENANCE
The Specialized Epic HTs are high performance bicycles. All regular maintenance, troubleshooting, repair and parts replacement must be performed by an Authorized Specialized Retailer. For general
information regarding maintenance of your bicycle, please refer to the Owner’s Manual. In addition, routinely perform a mechanical safety check before each ride, as described in the Owner’s Manual.
•
Great care should be taken to not damage carbon fiber or composite material. Any damage may result in a loss of structural integrity, which may result in a catastrophic failure. This damage may or may not be
visible in inspection. Before each ride, and after any crash, you should carefully inspect your bicycle for any fraying, gouging, scratches through the paint, chipping, bending, or any other signs of damage. Do not
SPECIALIZED USER MANUAL
EPIC HT
