USER GUIDE 2.0 (Cont.)
2.1. POWERED LINEAR ACTUATOR OPERATION (Cont.)
Charging
DO NOT
•
let the battery go completely flat as damage can occur to the battery.
If
•
the battery is flat you must charge it up before use as the actuator cannot be used
from the mains supply.
To test the
•
battery: Press either of the buttons on the remote, the battery charge
level is shown on the remote (Fig.2.1e), if only one light is shown charge the battery
immediately.
To charge
•
the battery: Plug the charger lead
into a wall socket.
Note:
The actuator cannot be
operated whilst on charge, 3 bleeps will be heard
to warn you that it is on charge when any of the
buttons on the remote are pressed.
The
•
charge indicator light will show up on the
charger (Fig.2.1f), a red light shows it is charging
and a green light shows that it is fully charged.
After
•
charging (about 3 to 8 hours), unplug the
charger cable from the mains. The charger cable
should be neatly stored under the seat or can be
removed from the charger (Fig.2.1g) for safety.
7
IF ANY PROBLEMS ARE ENCOUNTERED WITH THE ACTUATOR OR ASSOCIATED
CONTROL COMPONENTS ~ PLEASE CONTACT OUR CUSTOMER SERVICES
DEPARTMENT OR THE WHEELCHAIR SERVICES FOR ADVICE.
Fig.2.1f
Fig.2.1g
Fig.2.1e
