3.2. REMOVABLE COVERS
For
•
cleaning of removable covers please refer to wash label on the inside of the
padded cover.
To
•
remove the covers simply remove the pads from the 3D Modular System and unzip
the cover on each pad.
DO
•
NOT REMOVE THE FOAM FROM THE WATERPROOF LINER OR TRY TO
WASH IT AS THIS FOAM WILL ABSORB WATER AND WILL BE A PROBLEM TO
DRY OUT.
ANY
•
DEVIATIONS FROM THE ABOVE MAY AFFECT THE FIRE RETARDANCY OF
THE COVER(S).
3.3. HARNESSES, PADS & STRAPS
Make
•
sure all straps are in good working order and that buckles work correctly.
If
•
any show signs of fraying or any buckles are broken or faulty contact your
Wheelchair Service immediately,
DO NOT ATTEMPT TO REPAIR.
Harnesses
•
may be cleaned by applying a warm damp cloth with a mild detergent,
DO NOT USE POLISH.
3.4. VISUAL INSPECTION
Every
•
3 - 4 weeks check the condition of the 3D Modular System and wheelchair,
if you notice any faults or broken parts please notify your Wheelchair Service
immediately,
DO NOT ATTEMPT TO REPAIR.
Look
•
at the tubular frames of the 3D Modular System and make sure there are no
signs of distortion, make sure they are securely attached to the shell of the seat and
there are no loose attachments.
Make
•
sure that all fixings are secure, especially after making any adjustments.
Check
•
the shell of the seat for any signs of severe wear and tear. Also the foam lining
of the seat.
3.5. FIRE RETARDANCY
Fire
•
retardant materials have been used in the construction of this seating system.
It
•
is important that no accelerants are introduced to the materials (e.g. Hairspray, fabric
cleaners, deodorants, polish etc..), as this may adversely affect the fire retardancy of
your equipment.
18
