ASSEMBLY INSTRUCTIONS
S-T STRUCTURE FLIPTOP-C TABLE ASSEMBLY INSTRUCTIONS | 092021
specialt.net
888.705.0777
IF YOU ARE MISSING PARTS OR HAVE ANY QUESTIONS, PLEASE CALL CUSTOMER SERVICE AT 888-705-0777.
Structure
FlipTop-C
FLIP AND NEST TABLE
STRUCTURE FLIPTOP-C TABLE | ASSEMBLY INSTRUCTIONS
2. Arrange the appropriately marked leg with the
coordinating side of the beam. Slide the bases
over the vertical plates on each side of the
beam. Align the holes on the legs with the holes
in the beam. Attach the bases to the beam by
inserting round washer head screws through long
side of the columns, hand-tighten them.
ALIGN
F
A
A
3. Use either #3 Phillips screwdriver or impact drill
with #3 Phillips bit to tighten bolts as much as
possible.
A
B
A
F
1. Lay the beam upside down on a piece of
cardboard or carpeted surface. Remove the
release rod from the hardware pack, and screw
it into the beam.
B
E
