1.5. Product
Specifications
•
Number of pixels :
256
•
Pixel size:
50 by 200
µ
m
•
Bad Pixels:
Standard (2% max), Extended (5% max)
•
Peak sensitivity
Standard (1.55
µ
m), Extended (2.3
µ
m)
•
Peak responsivity:
Standard (0.95 A/W), Extended (1.1 A/W)
•
Spectral response range: (
0.9 to 1.7
µ
m standard mode) (0.9 to 2.6
µ
m extended mode).
•
Pixel resolution:
7nm with standard module and slit option.
•
Light entrance:
Dual SMA/50
µ
m slit standard. Other slit or fiber connections options available.
•
f#:
3.9
•
Grating:
One 600 grooves per mm included. Additional gratins available upon request.
•
Grating control:
Rs232
•
Filter:
Permanent
0.9
µ
m low blocking filter included. 1.3
µ
m low blocking flip-filter in extended model.
•
Filter (Extended Only)
LPF – 1300nm – 2500nm
•
InGaAs power supply:
*Input voltage = 100-120V AC with DB15 connector.
•
SM302 spectrograph power supply:
UL listed 110/220 V power pack, meets or exceeds UL1950,
CSA 1402C, and IEC 950 with 9 pin din connector.
•
Stray light rejection:
better then 10
-3
•
Analog to digital:
16-bit PCI interface, 333 kHz
•
Integration time:
Min: 5 ms, Max: 10 s
•
Dark Current @ 25
°
C:
Standard (0.1 pA typ.), Extended (1000 pA typ.)
•
Noise mV rms:
Standard 0.15, Extended 0.18
•
Maximum non-uniformity:
St/- 5% max, Ex/-10% max
•
Dynamic range:
Standard (10,000:1), Extended (8,000:1)
•
Dimensions:
10.5” x 5” x 4” (LxWxH)
•
Detector cooling:
Standard
(-10
°
C one stage TE), Extended (-20
°
C two stage TE)
•
Weight (detector):
3lb.
•
Software:
Windows control program and LabView
drivers included.
Spectral Products
2659-A Pan American Frwy., NE Albuquerque, NM 87107 Tel (505) 343-9700 Fax (505) 343-9705
www.spectralproducts.com
- 5 -
