User Manual
22
Note:
Usually it will not be necessary to make any adjustment to the
corner grub screw (
31
) to obtain an optimum throughput for the
E2 (
8
) mirror angle position.
Micrometer Screw (25) Adjustment
After adjustment of the final output mirror (
10
) and the output ellipsoid
mirror E2 (
8
), it may be possible to peak up the throughput energy to a
maximum value by adjusting the height of the ellipsoid mirrors (
7
and
8
) for their focal point from the sample surface in a sample cup (
19
).
(See Fig 13.)
Fig 13. Micrometer Screw for Ellipsoid Mirrors Focus Point
Clockwise rotation of the micrometer screw (
25
) will raise the ellipsoid
mirror arm assembly (
4
) increasing the distance of the E1 (
7
) and E2
(
8
) mirrors from the sample, whilst anticlockwise rotation will lower the
ellipsoid mirrors arm assembly (
4
) and bring them closer to the sample.
There is a finite distance whereby continued anticlockwise rotation of
the micrometer screw (
25
) no longer lowers the E1 (
7
) and E2 (
8
)
mirrors. Downward movement of the ellipsoid mirrors arm assembly (
4
)
is stopped by the shock absorber (
27
).
25
4
