2I-10800-10
15
Figure 6-3: Access to Mirrors M1, M3 and M6 - Cover Plate Removed
1. Using the 2.5 mm ball driver tool supplied, adjust the
rotational
alignment
of the mirrors M6, M3 and M1 in that sequential order, via
the grub screws, (7), (9) and (11). Carefully adjust each mirror one
at a time, maximizing the energy signal as far as possible before
moving onto the next mirror.
2. Again using the 2.5 mm ball driver, carefully adjust the
tilt alignment
of the mirrors using the grub screws labeled (8), (10) and (12) in turn
for these three mirrors (in the same sequence)
to maximise the
energy.
3. Repeat steps 1 and 2 a second time to obtain the best possible
alignment.
M6
M1
M3
