ATMOS™ HEATING JACKET
QS-24650-1
1
Quick Start Guide
For use with the Atmos A2.5, A5, A10 & A20 Gas Cells
More detailed information can be found in the Instruction Manual on the USB stick.
Step 1
–
Install the heating jacket
The metal portion of the Atmos heating jacket opens
to fit around the gas cell and is secured with a latch
at the front. The latch should be at the front with the
cable exiting the back of the gas cell. Velcro is then
used to secure the insulation around the gas cell.
Ensure the gas cell is secured to the spectrometer
using the lever-lock baseplate.
Step 2
–
Connect Controller
Connect the heating jacket to the 4000-series
controller. The connector is secured by rotating the
outer portion of the connector clockwise. Connect the
controller to a mains outlet using the cable provided.
Latch
Velcro
Insulation
Fig 1. Atmos Heating Jacket
Heated Jacket
Connection
Mains lead
connection
Fig 2. Controller Connection
