4
Chapter 2
Connections
Connections diagram
Important
• When connecting devices or making changes, be sure to turn the POWER switch OFF and disconnect the power cord from the electrical outlet.
Plug in the power cord last.
• If an extremely loud signal is input to this product, there is a danger that noise will be generated and cause damage. In such a case, lower the
input signal level.
1. When STEREO mode
• When a playback device is connected directly, connecting a preamplifier (separately sold) to the EX-VOL CONT terminals allows
you to adjust the volume of this product.
Ser. No.
RPA-W7 EX
Speaker system
To the electrical outlet
To AC IN
To the audio output terminal
Control amplifier, etc
To the balanced output terminals
L (left side)
To the speaker
terminals
To the speaker
terminals
R (right side)
* Depending on the
Control
amplifier used, there may be a caution regarding simultaneously connecting RCA and XLR, so refer to the operation
manual of the respective
Control
amplifier.
