Spearhead RC 132 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 76

background image

Spearhead RC

132/162

29

Never use the machine for cutting grass.

Never use the machine with defective blades, bushes or bolts. If a
rubber cover is defective it must be changed immediately.

Never use the machine for anything else than described in this
manual.

Never use the machine as a crane or lift.

Inadmissible Working:

The operational reliability of the delivered machine can only be guaranteed if it is used
according to the intended use as described in this manual. The limit value stated in the
data sheets must under no circumstances be exceeded.

The machine is not suited for cutting grass. The machine must never be used for
cutting the “back side” of a hedge, so that the rotating blades are facing the user.

When responsible for the machine always follow the rules below:



Always inspect the work area before starting work and remove potentially

dangerous material.



Never use the machine close to persons or animals. Read the section “Safety
Distances”.



Make sure that all cab covers are secured and that the windows remain closed

during work. If the vehicle has no cab, always wear safety glasses and
earmuffs.



Only use the machine with the correct speed of the blades.



Never approach the machine when it is running, always shut the engine off and

stop the vehicle.



Always remove the

ignition key when leaving the driver’s seat.



Only use the machine for the intended purpose. The machine is solely

constructed for hedge cutting. It must never be used for grass cutting or the like.



Lower the machine and set it in a horizontal position, so that there is no access

to the blades when parked or not in use.

«
...
27
28
29
30
31
...
»

Содержание RC 132













































































Отзывы:

Нет отзывов

Похожие инструкции для RC 132

Бренд: e-conolight Страницы: 3

Бренд: E+E Elektronik Страницы: 16

Бренд: E+E Elektronik Страницы: 14

Бренд: E+E Elektronik Страницы: 22

Бренд: E+E Elektronik Страницы: 16

Бренд: E+E Elektronik Страницы: 16

Бренд: Warmup Страницы: 4

Бренд: UltraGauge Страницы: 55

Бренд: Varta Страницы: 2

Бренд: KEDO Страницы: 2

Бренд: KEDO Страницы: 3

Бренд: KEDO Страницы: 2

Бренд: DEFA Страницы: 7

Бренд: Prorack Страницы: 15

Бренд: TERSUS Страницы: 27

Бренд: Smith-Victor Страницы: 2

Бренд: wattstunde Страницы: 40

Бренд: Whispbar Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды