Spearhead Q15S, Руководство по эксплуатации и каталог запасных частей

Страница: 14 / 39

Spearhead
Q15s, Q18s & Q21s
14 14 14 14
Servicing & Maintenance Servicing & Maintenance Servicing & Maintenance Servicing & Maintenance
Gearbox Gearbox Gearbox Gearbox
•
Before first use check gearbox oil level, thereafter check every 8 hours.
•
After the first 50 hours drain and replace the gearbox oil, thereafter annually.
Replace with EP90.
•
Regularly inspect gearbox seals. If oil is leaking replace immediately. This is
your responsibility to maintain a long and reliable working life.
•
Check that gearbox bolts are fully tightened.
Flail Rotor (Daily) Flail Rotor (Daily) Flail Rotor (Daily) Flail Rotor (Daily)
•
Grease all bearings daily.
•
Check there is no wrapping of string, plastic, grass or other debris on rotor
shaft and rear roller bearing.
•
Check the condition of flails and ensure all retaining bolts are tight. When
flails are replaced, care must be taken to maintain balance of the rotor shaft,
do not change to a different type.
•
Check flail retaining bolt and nut for tightness.
•
Never operate with any flails missing. This will cause severe vibration and
lead to rapid bearing wear and quickly cause the hood to crack.
•
Blunt flails leave an untidy finish and absorb excessive power, when re-
sharpening always wear protective clothing and goggles.
Warning
Check that all gearbox bolts are tight. When the machine is new there will
be a ‘bedding in’ period when very frequent checking is important.
Warning
It is imperative the grub screws are checked on the taper locks (once bedded
in, locative glue may prove useful).
Warning
Never carry out any servicing or maintenance work without first disengaging
the PTO and stopping the tractor..