8999123: v1 18/06/2018
Page 5.4 of 5.5 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 5.2
5.2
Cleaning the flail mulcher
DANGER!
This operation is extremely hazardous so the following instructions must be followed.
- Wear protective gloves and shut off the thermal engine of the agricultural tractor, subsequently disconnecting the PTO
shaft;
- For cleaning at the end of work, before completely stopping the machine, leave it on for 20-30 seconds so that any
material residue is ejected;
- The flail mulcher must be cleaned inside using an air jet and rags.
- Eliminate any residue of material or dust from the external surface of the machine.
WARNING!
It is strictly prohibited to clean the flail mulcher with water or other liquid substances.
5.3
Lubricants
With reference to Figure 5.3, the following lubricants are to be used for the different parts of the machine:
- For the transmission box (1):
SHELL SPIRAX S2 A 80W-90 or equivalent
responding the API - GL5/MIL-L-2105C
specifications is recommended. The quantity of oil is
0.8 lt
. Do not exceed the prescribed quantity;
- For all (2) greasing points:
SHELL RETINAX WB 2 GREASE or equivalent
is recommended.
