8999123: v1 18/06/2018
Page 2.5 of 2.7 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.4
Personal Protective Equipment
In general it is necessary to wear suitable clothing for the work to be carried out. In particular, as far as flail mulching
use, obey the following provisions:
-
It is mandatory
to use clothing which is as suitable as possible, meaning not too loose and without any protruding or
moving parts (for example ties or necklaces). Do not wear belts, rings and chains. Always use sturdy safety footwear.
Long hair must be tied using a specific cap.
-
It is mandatory
to use protective goggles or a mask before proceeding with the work in order to protect the face and
eyes from vegetable fragments which may be projected outwards during mulching.
-
It is mandatory
to use protective muffs in order to safeguard hearing from noise from the equipment during work.
2.5
Ecology and pollution
Below are the minimum provisions to be followed in order to reduce the risk of environmental impact connected to the
use of the machine according to European directives related to the Eco-compatibility of products connected to power
(Directive 2009/125/EC) and Restrictions in the use of dangerous substances in electrical and electronic equipment
(Directive 2011/65/EU):
- If the Country where the machine is used foresees specific sound emission limits, it is best to adapt to the provisions
in these standards, if necessary, being supplied with suitable protective equipment (earplugs, muffs, etc.).
-
It is mandatory
to respect current legislation of the Country where the flail mulcher is used, related to use and
disposal of lubricants and products used for machine cleaning and maintenance, observing the recommendations of
the manufacturer of those products.
- If replacing worn parts or during demolition, one must follow anti-pollution laws foreseen in the country where the flail
mulcher is used.
-
It is prohibited
to pour products used for cleaning or polluting substances into the sewerage drain, on the ground, in
watercourses, or into the environment.
-
It is mandatory
to collect products used for cleaning and polluting substances in appropriate containers, store them
and deliver them to companies authorised for their disposal.
2.5.1
Disposal
When the flail mulcher reaches the end of its working life, it is best to take a few precautions in order to avoid the risk of
environmental pollution. The various parts of the machine must be treated as if they were special waste. The machine
must be disassembled, grouping the various parts and components into similar materials (rubber, metal, plastic, etc.),
with each being disposed of according to existing anti-pollution laws locally of where the machine was used. Please
note that, in general,
exhausted lubricating oil, rubber parts and scrap metals are special waste
.
2.5.2
Preparation for storage
If the machine is to be stored unused for a long period, it is recommended to:
- Treat the flail mulcher according to the instructions contained in Section 5.2
“Cleaning the flail mulcher” paragraph;
- Check the machine and have any damaged parts replaced;
- Fully tighten all screws and bolts, in particular those which secure the Widia teeth;
- Perform a general thorough lubrication;
- Place the flail mulcher in a dry area where it cannot be touched by persons not authorised to use it, and rest it on
struts of wood.
- Protect the entire machine with a tarpaulin.
If these operations are carried out properly, the user will find the flail mulcher in perfect condition when it is required
again.
If the flail mulcher is to be dismantled, comply with the relative anti-pollution legislation of the local area of use.
It should not be forgotten that the manufacturer is always available if you require any assistance or spare parts.
It should not be forgotten that the manufacturer is always available if you require any assistance or spare parts.
