Spearhead AGRICUT 180, Инструкция оператора

Страница: 44 / 51

8999153EN: v1.0 18/12/2020
44
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
6.13 Recommended Lubricants
Supplier Gearbox (es) Grease Nipples Roller Chains
BP Energear Hypo 80W-90
EP Energrease L2M Penetrating oil
Castrol Multitrax 80W/140
EPX 80W/90
EPX 85W/140 Castrol MS 3
Castrol APS 2 Chain grease
STAT Oil Gearway G4 80W-90 MP Grease (Moly) Super oil for chain saws
Q8 Q 8 T 55 80W/90 Q 8 Rembrandt Moly S2 Q 8 Giotto/Q 8 Wagner
220
Mobil Oil Mobilube HD 80W/90 Mobilgrease Special Mobilvactra No. 2
Shell Spirax HD 80W/90 Retinax A Malleus HDX
Texaco Geartex EP-C 9-W/90 Molytex 2
Molytex EP 2 Way Lubricant
OK OK Gearoil GL 5 80W/
90 OK Molygrease OK Compound 2
Hydro Hypoid Gearoil 80W/90 Moly D Grease Moly chain wheel grease
6.14 Torque Settings
6.14.1 General Torque Settings
CAUTION!
This table refers to bolts without a torque setting specified above. Please check the “Specific
Torque
Settings” Section 6.14.2. Where a specific torque setting is given it should be used instead of the
information below.
The figures shown are for the torque moment for bolts of normal metric thread quality 8.8 black and/or
galvanised and ungreased when tightened on a smooth surface or a plain washer.
Thread Diameter (mm) Nm + 10% - 0
5 6
6 10
8 26
10 52
12 90
14 144
16 225
20 436
22 594
6.14.2 Specific Torque Settings
CAUTION! This table refers to bolts that MUST be tightened to the figure shown. Where a specific
torque setting
is given it should be used instead of the information shown in the “General Torque
Settings”; Section 6.14.1.
Agricut 270
Fastener Torque Setting (Nm)
P.T.O. shaft shear bolt 26
Outer gearbox mounting
bolts
225
Central gearbox
mounting bolts
90
Flexible coupling bolts 90
Blade carrier bolts 225
Cutting blade bolts 225
Rotor hub castle nut(s) Refer to Section 6.9