manualshive.com logo in svg

Spearhead 9561210, Руководство пользователя, Страница: 4 / 46

Поделиться
Скачать
Spearhead 9561210 Скачать руководство пользователя страница 4

 

 

 

8999070: v3 03/09/2018 

Page 1.4 of 1.9 pages 

 

    Original instructions (ENGLISH) 

Website:  www.spearheadmachinery.com 

Agricut 240 Offset Rotary Mowers 

 
This manual includes instructions for installation, use and maintenance of the Agricut 240 offset rotary mowers in 
the following sections. 
 
The machine is intended for the topping of grass pasture land after grazing, or for weed and thistle control on 
agricultural land. The machine is drawn by the tractor by means of a three-point hitch. The machines work on the 
ground under their own weight and by virtue of rotating rotors that are driven by 

the tractor‘s power take-off by 

means of a P.T.O shaft connection. Any different use should be considered improper and therefore potentially 
dangerous to the safety of the operator and any exposed persons. This manual is integral to the Agricut rotary 
mower, defines the purpose for which it was built and contains all the information required for proper and safe use. 
Regular machine operation depends on its correct use and adequate maintenance: it is advisable, therefore, to 
follow these instructions carefully to prevent any situation that could compromise the machine

’s operation and 

durability. It is also important to follow that which is described in this manual since Spearhead declines any liability 
resulting from negligence of from not observing these norms, since it would result in the warranty being annulled. 
 

It is mandatory

 to verify upon delivery that the Agricut rotary mower is integral and complete in all its parts. Any 

complaints must presented in written within 8 (eight) days from receiving the machine. Spearhead can however be 
contacted at any time for immediate and precise technical assistance and anything required for optimum operation 
and maximum performance of the equipment. Upon receiving the product, carefully read the manual and carefully 
follow the instructions contained in it. 

 

 

IMPORTANT 

 

All technical material or description in this manual is exclusively owned by Spearhead who prohibits 

the complete or partial reproduction of the same unless written approval has been issued by the 

Spearhead. 

 

Data, illustrations and descriptions in the manual cannot be considered binding. Spearhead reserves 

the right to make changes at any time that it considers to be suitable for improvement or for a 

constructive or commercial requirement. 

 

This manual reflects the state of techniques at the time of marketing the rotary mower and cannot be 

considered inadequate if updated at a later date due to modifications of related legal provisions. 

 

Spearhead declines any and all liability for damages caused by the rotary mower to persons, 

animals or property, resulting from use other than that described in this manual, or due to 

damage caused by negligence or by not observing the instructions contained in this manual. 

 

The manual should be carefully stored in a suitable area to guarantee its physical integrity; it should 

be easy to access by anyone authorised to consult it. The manual is an important document that 

should accompany the rotary mower and all users should be held responsible for safeguarding it. 

 

For additional information or clarifications regarding anything contained in this manual, or if the 

manual deteriorates, is destroyed or lost, using the rotary mower is prohibited and it is mandatory to 

request a new manual as soon as possible exclusively through: 

 

Spearhead Machinery Limited 

Green View, Salford Priors, 

Evesham, Worcestershire, WR11 8SW 

Direct download via Spearhead’s online PDF manual library 

http://dealerinside.spearheadmachinery.com/dealerinside/manuallibrary/default.aspx 

 

For technical enquiries email: 

[email protected]

 or call +44 (0)1789 491867 

For parts enquiries email: 

[email protected]

 or call +44 (0)1789 491862 

 

The following manual is an integral part of the product and must be stored carefully, in order 

that it keeps its integrity and can be consulted repeatedly throughout the entire life of the 

rotary mower. 

 

The rotary mower is manufactured to conform to the provisions contained in 89/392/EEC as 

amended by directive 91/368/EEC. 

Содержание 9561210















































Отзывы:

Нет отзывов