Spearhead 200F, Инструкция оператора

Страница: 9 / 45

8999124EN: v2.0 27/10/2021
9
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.2 Intended Usage
1.2.1 Allowed Uses
The mulcher is designed and built to mulch branches, overgrown vegetation and trunks up to 18 cm in
diameter.
When the mulcher works it guarantees the required level of safety even in the presence of an insignificant
malfunction of its components or hazardous operating conditions, however, always within the permitted uses.
With reference to the above, the following are considered allowed uses:
•
Using the mulcher to mow crop residue.
The mulcher must not be used for purposes other than those described in this manual.
1.2.2 Improper Uses
The mulcher, due to its typical construction, may also be suitable for uses other than from those foreseen by
the manufacturer. For this reason Spearhead has selected, as non-exhaustive examples, a series of
improper uses that can be reasonably foreseen, which are:
•
Using the mulcher to mulch trunks with a diameter exceeding 18 cm;
•
Using the mulcher to mulch or cut hedges;
•
Using the mulcher for shredding purposes near frequented areas.
The uses listed above and those not specifically indicated in this manual, including reasonably foreseeable
improper uses, are
strictly prohibited .
Spearhead declines any and all liability for damages caused by the Mulcher to persons, animals or
property, resulting from use other than that described in this manual, or due to damage caused by
negligence or by not observing the instructions contained in this manual.
1.3 Machine Identification
Each machine is equipped with a serial plate; see Figure 2 that includes the following data in this order:
1. UKCA Conformity Marking.
2. Machine Whole Goods Code (WGC).
3. Serial number of the machine.
4. Mass in kg.
5. Production Year (year of construction).
6. Design conformity standard.
7. Machine Product Group Code.
8. EU Authorised Representative QR scan code.
9. Manufacturer marking with name and address.
10. EAC Eurasian/Russian Conformity Marking.
11. EC European Conformity Marking.
12. Product Group Code.
Figure 2
– Serial Plate