Spear & Jackson N1F-GT-280/450-D Скачать руководство пользователя страница 4

AFTER SALES SUPPORT 

0345 605 2067  

Please read these instructions fully before operating or maintaining your machine

4

The following warning symbols appear throughout this manual and indicate the appropriate 
safety measures you should take when operating and maintaining the grass trimmer.

DESCRIPTION OF SYMBOLS

SAFETY INFORMATION

Objects thrown by the product could 

hit the user or other bystanders. 

Always ensure that other people and 

pets remain at a safe distance from 

the product when it is in operation.

In general, children must not come 

near the area where the

product is.

Do not expose the product to rain or 

wet conditions (moisture).

Warning! Keep other people 

out of working area during 

operation. A distance of at 

least 15 m must be observed.

Double insulations, Class II 

appliance.

Waste Disposal and Environmental 

Protection!

Be environmentally friendly. Return 

the tool, accessories and packaging 

to a recycling centre when you have 

finished with them.
Electrical machines do not belong in 

domestic waste.
Take the equipment to a waste 

disposal site. The plastic and metal 

parts that are used can be separated 

out into pure grade, which allows 

recycling.

Confirms to all relevant safety 

standards.

IMPORTANT!

Please read all of the safety and 

operating instructions carefully before 

using this tool. Please pay particular 

attention to all sections of this user 

guide that carry warning symbols 

and notices.

WARNING!

This is a warning symbol. This 

symbol is used throughout the user 

guide whenever there is a risk of 

personal injury. Ensure that these 

warnings are read and understood at 

all times.

Wear eye and ear protections.

Disconnect the mains plug 

immediately if the cable is 

damaged, has been badly twisted 

or is completely cut through and 

in the event that the device is left 

unattended for a short time.

Guaranteed sound power level.

Warning! Cutting device continues to 

rotate after the motor

is switched off.

96

Содержание N1F-GT-280/450-D



























Отзывы: