13
AFTER SALES SUPPORT
0345 605 2067
ASSEMBLE
Safety guard assemble
i. Align the guard (6) to the trimmer head and place it
over it.
ii. Secure the guard with the three screws which are
pre-assembled on motor housing.
Front handle assemble
i. Loosen the bolt with a screw driver from the front
handle.
ii. Align the front handle to the support and place it
onto it.
iii. Insert the bolt from the right through the opening.
And tighten the bolt with a screw driver.
2
3
Shaft assemble
i. Fix the lower shaft into the upper shaft.
4
6
