ASSEMBLE
PREPARE
OPERATE
Double the cord, about a foot from
the end. Lead the loop through the
hole on the rear handle (9) and
hook the loop over the cord strain
relief (9). Gently pull on the cord to
ensure that it is firmly attached.
Hold the product with one hand
at the rear handle (6) and with the
other at the front handle (3).
Press the on/off switch (7) and the
safety switch (4) at the same time to
switch the product on. Release
either the on/off switch (7) or the
safety switch (4) to switch the
product off.
Remove the blade sheath (10)
from the blade (1) of appliance
carefully .
Connect the plug of the cable to
the mains socket.
1
2
3
4
10
1
6
7
4
3
5
Important!
After each use, always
clean the blade, and lubricate the
blade.
9
