5
Cleaning and servicing must only be carried out by a qualified person in accordance with
all relevant current regulations.
To maintain optimum efficiency we recommend cleaning annually. However when a
BoilermagXT is fitted to an existing heating system we recommend more regular checks as it
is likely there will be a large build-up of ferrous oxide (black sludge) to clear out.
To service and maintain BoilermagXT follow the instructions below:
Lift out the magnetic cores using the handle on top
of the unit. *Warning see below*. Be careful not to
place the cores on or near ferrous items.
For 8",10" and 12" BMXT units, the weight may exceed safe single person lifting limits.
Please check and if required do as 2 persons or alternatively as a mechanical lift.
Either place a bucket underneath or connect a
hose to the 1¼" drain valve on the underside of
the BoilermagXT. Remove the drain plug and open
the drain valve. Partially open the inlet isolation
valve and allow the contents to drain through
the drain valve.
Isolate the heating system and close the isolation
valves on either side of the BoilermagXT unit.
Remove the black tricone positioned on the lid.
Servicing & Maintenance Instructions
2
1
4
3
www.boilermag.com
