SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747
11/06/17 www.speakman.com 92-S-2280-01
SPEAKMAN
®
S-2280
Installation, Operation & Maintenance Instructions
ANYSTREAM® SHOWER HEAD
DESCRIPTION
Polished chrome plated ANYSTREAM wall mounted shower head. Rigid brass ball. Spray adjusting T-handle,
2-1/4” face. 4 Lexan® deposit resisting plungers with 32 spray channels. Drilled for but less mounting bolts.
Water conserving pressure compensating AUTOFLO® device reduces flow to 2.5 GPM/9.46LPM maximum, to
meet existing ANSI A112.18.1 Standard. Vandal resistant standard. ½” NPT back inlet.
SPECIFICATIONS
Options:
SUPPLY INLET:
½” NPTF
FLOW RATE:
2.5 GPM/9.46LPM MAXIMUM
FLOW CONTROL:
VARIABLE
SHIPPING WEIGHT:
2.1 LBS
INSTALLATION
Apply pipe thread tape in a clockwise direction to threads of supply nipple. Pipe joint compound may be
used instead of tape. Turning in a clockwise direction, thread the showerhead on to the supply nipple.
Tighten & position with a strap wrench or a pair of soft jaw pliers. Mark and drill holes for mounting screws
(not provided). Note: If necessary, remove shower head and use proper screw anchors (4) (not provided).
Turn the water supply on and check for leaks. Tighten mounting screws (4).
OPERATION
To adjust the spray pattern of the shower head, simply rotate the handle to the desired spray (needle spray,
gentle rain or full flood).
MAINTENANCE
The gleaming finish of your SPEAKMAN WATERSAVER® shower head can be cleaned by using mild soap and
warm water. Dry immediately with a soft, clean cloth for best results. The flow control device limits water
flow to 2.5 gallons per minute. The small orifice may become clogged with scale and other minerals found in
potable water. To clean the flow regulator, simply loosen the side set screw and remove the shower head
from the flanged elbow, remove the flow control from the brass retainer and clean as necessary.
ROUGH-IN
AP
Anchor Plate Assembly with Mounting Screws
BJ
Ball Joint
E15
Low Flow Head (1.5 GPM/ 5.7 LPM)
(Ball Joint Only)
E20
Low Flow Head (2.0 GPM/ 7.6 LPM)
(Ball Joint Only)
Содержание Sentinel Mark II SLV-3420
Страница 1: ...SPEAKMAN SPEAKMAN...
Страница 2: ...SPEAKMAN...
