14
Turn on water supplies. Turn on Valve to the
"WARM" position and flush for 1 minute.
15
OPTION:
If your unit comes with shower head,
apply Thread Seal Tape to threads of Shower Arm (1). Thread
Shower Head (2) onto Shower Arm (1) and tighten with Adjustable Wrench. Check all connections for leaks.
NOTE:
Shower head not
included with all models.
Shown for reference only.
SERVICE INSTRUCTIONS
SPEAKMAN
®
Service Instructions
Caution- Any repair or servicing of the Valve may effect the maximum outlet
temperature setting of the Valve. After working on the Valve, make sure the
maximum outlet temperature is set to the recommended setting of 110 °F.
Cartridge Removal: see STEP 11.
1) Shut off the HOT & COLD water supplies to the Valve.
2). Remove the Handle Screw & Handle. Remove Dial Plate Screw and the
Dial Plate.
3) With the Valve in the “OFF” position, remove the four (x4) Valve Bonnet
Screws. Carefully remove the Cartridge Assembly. Ensure nothing is left over
in the Valve Body cavity.
4) Replace with new Cartridge Assembly. Make sure the Large Bonnet
O-Ring Seal is installed and seated properly in the Valve Body. Reassemble
the Cartridge Assembly, making sure the “UP” on the Bonnet is in the up
position. Tighten the four (x4) Bonnet Screws. Turn "ON" the HOT & COLD
water supplies. Check the Valve for leaks.
5) To limit the maximum outlet temperature the Valve delivers,
see STEP 12
.
6) Reassemble the Dial Plate and the Handle using the same Screws as
removed earlier,
see STEP 13
.
A
A.
Remove Cap on
Hot Water Supply
Stop Valve with Flat
Tip Screw Driver.
B
B.
Secure the
included "Key" to
the Stop Valve
using the included
Screw and turn
clockwise to shut
"OFF".
Repeat for Cold
Supply Stop Valve.
To turn "ON",
secure the included
"Key" to the Stop
Valve using the
included Screw and
turn counter
clockwise.
Replace Cap on
Stop Valve.
S-1495-AF / S-1497-LH REPAIR PARTS
SPEAKMAN
®
RPG04-0367-PC
HANDLE WITH SCREW
RPG05-106096
RETROFIT "PB" KIT
ITEM NO.
PART NO.
DESCRIPTION
