MOUNTING THE WALL BRACKET
The Tantra On-Walls utilizes a unique mounting sys-
tem. The Wall Bracket is mounted onto a stud in the
wall. Then, the Tantra Series Speaker simply slips onto
the Wall Bracket, securing the cabinet to the wall.
Refer to
Diagram 6
and follow steps 1–3.
1.
Locate the stud using a good, quality stud
finder.
2.
Using good, strong mounting screws, mount the
bracket to the stud. Be sure the main channels are
in the position shown in
Diagram 7.
3.
If a stud is not found in the desired mounting
location, the speakers can be mounted directly
onto the drywall.
CAUTION: Regular drywall screws
should NOT be used for this application.
We HIGHLY
recommend using anchors specifically designed
to withstand a minimum of 25 lbs.
For horizontal mounting refer to Diagram 8
and follow steps 1-3 above.
Mounting the Cabinet
Now that the wall bracket is secured to the wall you
are ready to mount your speaker.
1.
Attach the cabinet screws to the rear of the
cabinet. These screws are included with the
packaging.
(Diagram 9)
2.
Fish the speaker wire through the mounting
bracket
(Diagram 10)
and connect it to the
speaker terminals. Refer to the wiring section of
the manual for connection instructions.
3.
Align the cabinet against the wall bracket's two
main channels. Push in the cabinet with both
hands and slide it down so that it locks into
place as shown in
Diagram 2 & 3.
DIAGRAM 6:
Vertical Wall Mounting
DIAGRAM 10:
Fish Speaker Wire
3
Note: When mounting the Wall Bracket, we
recommend using a level.
DIAGRAM 9:
Cabinet screws
DIAGRAM 7:
Channel Position
Vertical Orientation
Horizontal Orientation
DIAGRAM 8:
Horizontal Wall Mounting
Содержание Tantra Triple LCR
Страница 1: ......