8
LINE OUT Jacks
Preamp Sources connected to the L and R
LINE IN
jacks can be passed or
“Looped Through” to other preamps or amplifiers by connecting to the cor-
responding
LINE OUT
jacks, just to the right of each L & R IN jack. Up to 5
SpeakerCraft amplifiers (such as the BB50-S) can be daisy-chained together in
this manner.
(See Diagram 3 for jack locations)
USING THE TRIGGERED INPUTS
The BB50-S permits ON/OFF triggering of its internal amplifier (B Amp) by
four different sources.
(See Diagram 9)
They can be selected in combination
or in groups, as desired. If more than one is selected at a time, the first trigger
to go high will turn the BB50-S ON and it will stay ON until the last trigger
goes low. The triggers are as follows:
VIDEO IN/OUT Jacks
The
Video IN
jack is provided for Video triggering purposes only. Use it
whenever you wish to have the BB50-S trigger ON and OFF with the power-
ing ON and OFF of a Video source, such as a DVD or VCR. Simply connect
the Composite Video OUT of such a component to this
VIDEO IN
jack. You
would then flip the Video Trigger toggle switch to the VIDEO ON position to
activate the trigger function.
(Refer to Diagrams 7 and 9)
The
VIDEO OUT
jack allows you to “Loop” the Video signal through to a
Video Monitor or the Video Input of another component, without the need
for an external Video splitter or “Y” connector.
BYPASS ON/OFF Switch
This toggle switch allows you to bypass the L & R Gain Pots located on the
front panel. To enable the Gain Pots, set this switch to
BYPASS OFF
. To disable
them, set it to
BYPASS ON
.
(Refer to Diagram 8)
Diagram 7
VIDEO IN/OUT Jacks
Diagram 8
BYPASS ON/OFF
Toggle Switch
