BassX-8/10/12 Owner’s Manual
Page 7
OPERATION
Once the BassX-8, BassX-10 or BassX-12 is connected, use the controls
described
below to make adjustments so that it will blend seamlessly with the other
speakers in
your system.
(See Diagrams 6 & 7)
Power Switch
This switch turns the BassX-8, BassX-10 or BassX-12 on or off. When switched
to the
“On” position, the green light will illuminate; when “Off”, the red light will
illuminate.
Volume Knob
Use this control to match the output of the BassX-8, BassX-10 or BassX-12 to
that of the
main speakers in the system. We recommend that you play a variety of mate-
rial before
selecting a setting. Start with the control in the “Off” position (completely coun-
terclockwise)
and slowly turn it up.
Boost Knob
Use this control to adjust the bass of the BassX-8, BassX-10 or BassX-12 from
0dB to 3dB.
Frequency Knob
Use this control to adjust the upper frequency limit of the BassX-8, BassX-10 or
BassX-12. The purpose is to control the overlap the upper frequencies of the
BassX-8, BassX-10 or BassX-12 and the main speaker’s lower frequencies.
Phase Switch
Allows you to toggle between 0° and 180° phase modes. Listen to the system and
leave the switch in the position that has more audible bass.
DIAGRAM 6:
Power Switch (Rear Panel)
DIAGRAM 7:
Front-Mounted Controls
No sound is heard.
A hum or buzzing sound is heard.
The sound may be caused by a ground loop in the system. Try
to eliminate this by reversing the AC plugs of other components
in the system.
Try plugging the receiver into another outlet.
Other causes may include faulty cables.
The BassX-8,
BassX-10 or BassX-12
will not turn on.
The subwoofer must be plugged into a live outlet. The power
switch on the back panel must be on. A signal must be playing
into the input jacks.
Audio cable to the receiver is not connected properly or the
cable is bad. Use another cable that you know is good.
Check all wire connections and plugs.
The Problem
Possible Causes And Solutions
TROUBLESHOOTING
The BassX-8, BassX-10 and BassX-12 are designed to function trouble-free. Most problems occur due to operating errors. If you have a
problem, please check the troubleshooting list first. If the problem persists, please call Tech Support at 1-800-448-0976 or e-mail us at
[email protected].
