background image

6

SPECIFICATIONS

Bass Power 250

Mono Class A-B dedicated 
subwoofer amplifier

250 watts

Variable Low Pass Crossover 
50Hz to 150 Hz, LFE 30Hz to 600Hz

5 minutes

3.0 mv

3

1

2

" x 17" x 11

1

2

(89mm x 432mm x 292mm)
(add 

1

2

" for feet & 4" for rear panel 

connectors)

Type:

Power Output:

Crossovers:

Auto Off Time:

Auto On Sensitivity:

Dimensions H x W x D:

In our attempt to constantly improve our products, features and specifications are subject to change without notice.

Bass Power 200

Mono Class A-B dedicated 
subwoofer amplifier

200 watts

Variable Low Pass Crossover 
50Hz to 150 Hz, LFE 30Hz to 600Hz

5 minutes

3.0 mv

3

1

2

" x 17" x 11

1

2

(89mm x 432mm x 292mm)
(add 

1

2

" for feet & 4" for rear panel 

connectors)

Bass Power 150

Mono Class A-B dedicated 
subwoofer amplifier

150 watts

Variable Low Pass Crossover 
50Hz to 150 Hz, LFE 30Hz to 600Hz

5 minutes

3.0 mv

3

1

2

" x 17" x 11

1

2

(89mm x 432mm x 292mm)
(add 

1

2

" for feet & 4" for rear panel 

connectors)

PRINTING INSTRUCTIONS: Bass Power MANUAL - INK: BLACK  (1 over 1) - MATERIAL: 80lb Gloss - SIZE: 8.500” x 11.000”

LIMITED TWO YEAR WARRANTY

SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials 
and workmanship for a period of two years, provided the product was purchased from a SpeakerCraft Authorized Dealer. 

Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from 
whom they were purchased, or to the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect 
shipments will be refused. It is preferable to ship this product in the original shipping container to lessen the chance of transit damage. 
In any case, the risk or loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or SpeakerCraft 
Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, 
SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except 
as  set  forth  below.  If  this  model  is  no  longer  available  and  can  not  be  repaired  effectively,  SpeakerCraft,  at  its  sole  option  may 
replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to 
the mounting surface may be required. If mounting surface modification is required, SpeakerCraft assumes no responsibility or liability 
for such modification. All replaced parts and product become the property of SpeakerCraft Inc. Products replaced or repaired under 
this warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.

This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inad-
equate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair 
or modification of the product which has not been authorized or approved by SpeakerCraft. This warranty also excludes normal 
cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial number on the product has been 
removed, tampered with or defaced.

This warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, 
the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any inci-
dental or consequential damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft 
Inc. Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party.  
Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and 
exclusion may not apply.

All implied warranties on the product are limited to the duration of this expressed warranty.  Some states do not 
allow limitation on the length of an implied Warranty. If the original retail purchaser resides in such a state, this 
limitation does not apply.

Содержание Bass Power 250









Отзывы: