Page 4
AIM7 MT Owner’s Manual
LIMITED LIFETIME WARRANTY
SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials and workmanship, provided the speaker was pur-
chased from a SpeakerCraft Authorized Dealer.
Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from whom they were purchased, or to the SpeakerCraft
factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is preferable to ship this product in the original shipping container to
lessen the chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or SpeakerCraft Authorized
Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the SpeakerCraft Authorized Dealer will, at
its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, SpeakerCraft, at its
sole option, may replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be
required. If mounting surface modification is required, SpeakerCraft assumes no responsibility or liability for such modification. All replaced parts and product become the property of
SpeakerCraft Inc. Products replaced or repaired under this Warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.
This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use,
voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized or approved by SpeakerCraft. This Warranty
also excludes normal cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial Number on the product has been removed, tampered with or
defaced.
This Warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchaser’s sole
remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any incidental or consequential damages arising out
of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft Inc. Authorized Dealer has been advised of the possibility of such
damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation
and exclusion may not apply.
All implied warranties on the product are limited to the duration of this expressed Warranty. Some states do not allow limitation on the length of an
implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.
For technical inquires, please call 1-800-448-0976 or e-mail us at [email protected]. We are available to assist you every weekday, except holi-
days, between the hours of 7:00 a.m. and 5:00 p.m. PST.
SpeakerCraft offers a variety of accessories to make your installation of this and other SpeakerCraft products easy, economical, and
professional. Contact your authorized SpeakerCraft Dealer for more information.
Speaker Type:
High Frequency Driver:
Low Frequency Driver:
Impedance:
Sensitivity:
Frequency Adjustments:
Frequency Response:
Power Recommendations:
Cut Out (H x W):
Dimensions (H x W x D):
2-Way Pivoting In-Wall
Independently pivoting 1"
Treated Silk Dome Tweeter
7" Polypropylene Cone Woofer
8 ohms
92dB 1W/1m
None
40Hz - 20kHz ± 3dB
5 - 100 watts (undistorted)
12
3
⁄
4
" x 8
1
⁄
8
"
14½" x 9
7
⁄
8
" x 4"
(overall at full pivot)
AIM7 MT One
SPEAKER SPECIFICATIONS
In our attempt to constantly improve our products, features and specifications are subject to change without notice.
2-Way Pivoting In-Wall
Independently pivoting 1"
Treated Silk Dome Tweeter
7" Resin Reinforced Fiberglass Cone
Woofer
8 ohms
90dB 1W/1m
Front mounted treble switch allows
the treble to be set at one of two
positions: -3dB, +3dB.
40Hz - 20kHz ± 3dB
5 - 125 watts (undistorted)
12
3
⁄
4
" x 8
1
⁄
8
"
14½" x 9
7
⁄
8
" x 4"
(overall at full pivot)
AIM7 MT Two
2-Way Pivoting In-Wall
Independently pivoting 1" Aluminum
Dome Tweeter
7" Aluminum Cone Woofer
8/6 ohms depending on switch
settings
91dB 1W/1m
Front mounted separate bass and
treble switches that allow the bass
and treble to be set at one of two
positions: -3dB, +3dB.
40Hz - 20kHz ± 3dB
5 - 125 watts (undistorted)
12
3
⁄
4
" x 8
1
⁄
8
"
14½" x 9
7
⁄
8
" x 4"
(overall at full pivot)
AIM7 MT Three
2-Way Pivoting In-Wall
Independently pivoting 1" Aluminum
Magnesium Dome Tweeter
7" Aluminum /Magnesium Cone
Woofer
8/6 ohms depending on switch
settings
92dB 1W/1m
Front mounted separate bass and
treble switches that allow the bass
and treble to be set at one of two
positions: -3dB, +3dB.
37Hz - 20kHz ± 3dB
5 - 150 watts (undistorted)
12
3
⁄
4
" x 8
1
⁄
8
"
14½"x 9
7
/
8
"x 4”
(overall at full pivot)
AIM7 MT Four
940 Columbia Avenue, Riverside, CA 92507
(800) 448-0976 Fax (951) 787-8747
www.speakercraft.com
LIT81700 (rev2)