NOTE 1:
Mounting Frame MUST be
removed from the Speaker
Baffle before installing the
Cinema In-Wall subwoofer
onto the AccuTuneBox.
NOTE 2:
Only this part of the baffle
mounts to the AccuTuneBox.
Be sure keep all included
mounting screws for installa-
tion of baffle to the Accu-
TuneBox. See
Diagram 1
Please refer to
Diagram 1
&
Notes
for instructions on how to install the AccuTuneBox.
INSTALLATION
STEP 1:
Using the wood screws provided,
install stud brackets to top and
bottom corners of the AccuTuneBox.
STEP 2:
Connect the speaker
cable to the negative
and positive inputs at
the top of the Accu-
TuneBox.
STEP 3:
Position the AccuTuneBox
at the desired height and
fasten the stud brackets
into the studs with the
mounting screws provided.
STEP 4:
Make speaker cut-out by using
the attached plastic template
as your reference, then install
drywall to studs.
STEP 6:
Connect speaker cable to
the negative and positive
inputs of the AccuTuneBox.
Screw the sub to the back
box (and wood board insert,
if needed) using the same
screws from the baffle.
STEP 5:
Use wood board insert
only when installing into
5/8" drywall.
STEP 7:
Before proceeding, read the
Notes section below for impor-
tant baffle information.
Using the original mounting
foot screws provided, install the
baffle as shown.
CAUTION: Overtightening the
screws can cause the baffle to
warp.
NOTES
DIAGRAM 1
1
PRINTING INSTRUCTIONS: AccuTuneBox MANUAL - INK: BLACK - MATERIAL: 80lb Gloss - SIZE: 8.500” x 11.000”
