Speaker wall mount set, inclinable
Item no. 1420058
Version 02/16
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
1420058_v1_0216-HK
Intended use
The product is intended for installing speaker boxes to a wall or ceiling. The speaker wall mounts are
inclinable. The ball joint on the connector allows for the speaker to be rotated by 360°.
The loudspeakers may not exceed the maximum weight specified under "Technical Data".
If you use the product for purposes other than those described above, the product may be damaged. Any
other than the intended use described above might result in damage to the product or the loudspeakers and
furthermore causes hazards such as damage to furniture in the vicinity of the wall bracket, personal injury,
etc. Read the instructions carefully and keep them for future reference. Make this product available to third
parties only together with its operating instructions.
The product must not be modified or altered! Please follow all safety instructions under all circumstances.
Delivery content
• 2x wall bracket (A)
• 2x speaker connector with ball joint (B)
• 6x cap, short (C)
• 2x cap, long (D)
• 4x screw M4 x 10 (M-A)
• 4x screw M5 x 10 (M-B)
• 4x screw M6 x 10 (M-C)
• 8x anchor screw (M-H)
• 4x washers D4 (M-D)
• 4x washers D5 (M-E)
• 12x washers (M-F)
• 8x dowels (M-I)
• Allen key (M-G)
• Assembly instructions
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in these
operating instructions, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
The arrow symbol indicates special tips and instructions.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
• Assembling the product in an unsuitable location can lead to property damage and personal injury.
• Exercise caution when assembling the product! The product might contain sharp edges. Risk of injury!
• Only perform such operations that are required for the installation (or adjustment) of the speaker wall
mount. Never attempt to modify or repair the product.
• Before starting the installation, check whether the rear of the speaker features suitable fastening means
for attaching the speaker wall mount.
• Depending on the size of the loudspeaker, it may be helpful to ask a second person to assist you in
installing the product. That person could, for example, hold the speaker while you attach the speaker to
the wall mount.
• Perform the installation thoroughly. The speaker or wall mount falling down might not only cause expensive
consequential damage but also constitutes an increased risk of injury!
• Guide the speaker cable in such a way that it cannot get bent or jammed by the wall mount.
• Check all screw connections every 3 months the least. Adjusting and moving the speaker or wall mount
can cause the screw connections to become loose over time.
• Do not apply any force when moving/adjusting the speaker or wall mount. This may cause damage to the
loudspeaker.
• Do not apply pressure to the front and/or radiating surface of the loudspeaker to align/adjust it.
• Do not overload the speaker wall mount. Heed the manufacturer's data on the maximum weight of the
loudspeaker.
• Do not use the speaker wall mount to support yourself or to hold on to.
• Do not attach any other objects to the speaker wall mount except for the designated speaker.
• In case of doubt, do not install the product yourself; have a professional do it for you.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Also observe the safety and operating instructions of any other devices which are connected to the product.
b) Miscellaneous
• Consult a professional if you require assistance with product operation, safety or connection.
• Maintenance work, adjustments and repairs may be carried out only by a professional or at a specialist
workshop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
Installation
Wall and ceiling installation is only permissible, if the wall or ceiling construction is
suitable. Thin plasterboard walls or drywall over unstable subconstruction are usually
not suitable. A specialist shop may however offer special wall anchors for walls of this
kind. Contact a professional before installation in case of doubt.
Use installation materials (screws, wall anchors, etc.) that are suitable for the surface
(e.g. concrete). The included plug screws are suitable for solid walls only. The speaker
wall mount does not include special dowels and screws; those must be purchased
separately depending on the wall construction.
Ensure stability in accordance to the weight of the speaker and wall mount, and the
leverage effect.
Select the installation location carefully to ensure correct position (height and place) of
the wall mount and the attached speaker after installation.
When drilling and tightening the screws, make sure no cables or wires in the wall are
damaged. Accidentally drilling into electrical wiring poses a risk of fatal injury due to
electric shock!
Keep your own safety in mind when handling power tools (e.g. power drill). Observe all
other safety instructions in the manufacturer's instructions.
Make sure no persons are present in the area underneath the speaker wall mount or
speaker box during installation.
Observe the corresponding images in the included installation instructions.
• Carefully select a suitable position for wall installation. The speaker wall mount with the attached speaker
boxes can be aligned after installation.
• Use a water level to ensure the wall mount being attached vertically and facing straight upwards. The rear
side of the wall mount must lie flat against the wall/ceiling. The wall mount must be attached securely to
the wall and must not move at all. But do not over-tighten the screws.
Figure 1a and 1c:
• In case of walls and ceilings with timber beam structures, attach the wall mounts using two screws (M-H)
and two washers (M-F). Use the wall mount as template and mark the screw positions accordingly. Ensure
a sufficiently wide and stable surface on the timber beam structure.
Figure 1b and 1d:
• For solid walls and ceilings, attach the wall mounts using four dowels (M-I), four screws (M-H) and four
washers (M-F). Use the wall mount as template and mark the drill hole position.
Figure 2, 3 and 4:
• Cover the screw heads on the wall mounts with the caps (C+D).
• Speaker boxes usually feature suitable screw holes on their backside for attaching a speaker wall mount.
• Attach the speaker connector piece to your speaker box using two screws and washers. Check whether
the provided screw size (M-A, M-B or M-C) including washer (M-D, M-E or M-F) is suitable for your speaker
box. Otherwise you will have to purchase other suitable screws and washers separately.
• Make sure that the maximum weight (max. 3.5 kg) for the loudspeaker is not exceeded. Connect the
speaker box with the speaker connector piece to the wall mount. If necessary, work together with another
person holding the speaker box. Turn the knurled nut on the connector piece, until the speaker box is
positioned properly. Keep in mind that the speaker cable might have to be connected as well.
Figure 5
• Loosen the knurled nut to align the speaker box. Loudspeakers should preferably be at ear height of the
sitting listener.
• Tighten the knurled nut, once the speaker box in at the desired position.
Maintenance and cleaning
• Never use aggressive cleaning agents, rubbing alcohol or other chemical solutions, as those could
damage the surfaces or even affect the functionality.
• The product is maintenance-free and does not require any care except for occasional cleaning with a
soft, dry cloth.
Disposal
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Weight load ................................................max. 3.5 kg (each speaker wall mount)
Tilt angle ....................................................-15 to + 15°
Rotation range ...........................................360°
Dimensions (W x H x D) ............................96 x 96 x 95 mm (each speaker wall mount)
Weight .......................................................approx. 535 g (a pair, incl. mounting material)