Connection and getting started
• Connect the HDMI input (“HDMI INPUT”) of the converter to the corresponding output of your
playback device (e.g. a BluRay player or game console).
• Connect the cinch sockets of the analogue AV output, using a suitable cable, to the
corresponding inputs e.g. of a TV set, a video recorder, an amplifier, etc.
• Connect the mini USB socket of the converter via the provided USB power cable to a USB
port e.g. of a gaming console, a television or similar.
You can also, for example, use a USB port of a corresponding power supply or
similar device that can provide and deliver the required output current (see chapter
“Technical Data”).
• You can select the signal format of the video output on the converter using the “PAL/NTSC”
sliding switch. In Europe, “PAL” is usually the setting needed.
• Switch on all devices connected to the converter.
Care and cleaning
• Disconnect the product from the power supply before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fiber-free cloth.
• Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Input voltage .................................5 V/DC
Power consumption ......................max. 300 mA
Input..............................................1x HDMI (max. 1920 x 1080, 60 Hz)
AV output ...................................... 1x composite video signal, cinch socket, switchable
between PAL and NTSC
1x stereo audio signal (line level), 2 cinch sockets
Operating conditions .....................
0 to +40 °C, 20 - 90 % RH (non-condensing)
Dimensions (W x H x D) ...............approx. 66 x 55 x 20 mm (incl. cinch sockets)
Weight ..........................................approx. 40 g
Operating instructions
HDMI/Composite Converter
Item no. 989287
Intended use
The product is used to convert an HDMI-compatible AV signal into an analogue AV signal.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
The power is supplied via a USB port.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, etc. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• HDMI/Composite Converter
• USB power cable
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• When laying out the USB power cable, make sure that it is not damaged by sharp
edges.
• Consult an expert when in doubt about operation, safety or connection of the
device.
•
Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*989287_V1_1017_02_mxs_m_en
