These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro
fi
lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
Version 02/13
HDMI to VGA/YPbPr converter,
1080p
Item no. 98 93 51
Tips and Notes
• The monitor connected to the output of the converter must support the resolution provided by
the HDMI input.
If you feed in a 1080p signal, the monitor must be capable of displaying a resolution of
1920x1080 in 60 Hz. If this is not the case, a distorted image will be displayed or there will be
no image at all.
In this case, try using a monitor which supports such a high resolution. Alternatively, set a
lower resolution (e.g. 1280x720p) on your playback device.
• The converter does not depend on the operating system used. Furthermore, the converter
does not require any software or drivers.
• Should the playback device have several video outputs, ensure that the correct output is
enabled and provides an image.
Cleaning
Prior to cleaning the device, pull the wall plug transformer out of the mains socket.
Use a clean, dry, soft cloth for cleaning. Do not use aggressive cleaning agents, as these can
cause discolouration. Do not press too strongly on the surface when cleaning, to prevent scratch
marks.
Dust can easily be removed using a clean, long-haired brush and a vacuum cleaner.
Disposal
Electrical and electronic devices do not constitute household waste.
Dispose of an unserviceable product in accordance with the relevant statutory regula-
tions.
Technical Data
Input..............................................HDMI
Video output .................................VGA or YPbPr
Audio output ................................. Stereo-analogue or optical/digital (3.5 mm stereo jack socket
with integrated optical output)
Power supply ................................via USB, 5 V/DC, 500 mA
Ambient temperature ....................0 °C to +40 °C
Ambient humidity ..........................10% to 90% relative air humidity, non-condensing
Dimensions (L x W x H) ................approx. 73 x 42 x 19 mm
Weight approx. .............................118.5 g
O P E R A T I N G I N S T R U C T I O N S
Intended use
The product is used to convert an HDMI-compatible signal into an analogue VGA or YPbPr video
signal and an analogue/digital audio signal.
The power is supplied by the enclosed USB cable.
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package Contents
• Converter
• USB cable
• VGA cable
• VGA-YPbPr cable
• TOSLINK adapter
• Operating instructions
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any resulting
damage!
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions! In such
cases, the warranty will be null and void.
• The unauthorised conversion and/or modi
fi
cation of the product is not permitted for safety and
approval reasons (CE). Never dismantle the product.
• The product is not a toy and should be kept out of the reach of children.
• The product is intended for use only in dry, indoor locations. No part of the product must be
allowed to get damp or wet.
• Do not leave packaging material carelessly lying around, since it could become a dangerous
plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or accidental falls, even
from a low height.
Connection and Getting Started
• Connect the HDMI socket (“HDMI Input”) of the converter to the HDMI output of a suitable
playback device (e.g. BluRay player) using an HDMI-compatible cable.
• Depending on whether you need a VGA signal or a YPbPr signal, connect the corresponding
cable provided to the VGA connector of the converter.
The cinch connectors of the VGA-YPbPr cable are marked in colours. During installation,
make absolutely sure you observe the correct allocation (green = Y, blue = Pb, red = Pr).
• The 3.5 mm jack socket provides both an analogue and an optical digital audio signal.
Depending on the signal you wish to use, connect either a conventional audio cable with
3.5 mm stereo jack plug or an optical cable.
An appropriate 3.5 mm adapter is included in the package for the optical cable with TOSLINK
plug.
• Connect the converter to a USB port of your computer or USB hub using the USB cable provided.
Due to the power consumption of the converter, this must be a USB port which can
deliver a current of 500 mA (e.g. a USB port of the computer or the USB port of a USB
hub with separate power supply).
• Make sure that the cables are not kinked or pinched.
• Switch on your monitor and your computer. Select the correct input on the monitor, if required.
• When the converter is supplied with power via the USB cable, a blue LED on the casing’s top
of the converter lights up.
