These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.
Version 05/14
TV wall holder 66-140 cm
(26-55”) 45 kg
Item no. 527504
Pay special attention to your safety when using electric tools (e.g. a drill). You should also heed
the safety instructions in the corresponding instructions.
Make sure no persons are in the area under the TV wall holder and/or the TV set during the instal-
lation.
Please observe the images on the attached sheet of these operating instructions.
Preparation of the TV set
• It is usually necessary to remove the TV set’s base before mounting it on a wall holder. Observe the operating
instructions for your TV set.
• Put the TV set flat on a soft and clean underlay, the display side facing downwards. Do not apply pressure on the
display. Protect valuable furniture surfaces during installation by using a suitable pad or cloth.
• Remove the present base. Depending on the TV set, this base is either screwed tight or clipped on.
Image 2
• Select the position and the height of the wall holder at the mounting location. In this process, the joint on the frame
of the wall holder must point to the left.
• Attach the level indicator enclosed (M) to the frame and align horizontally, as shown in the diagram.
• Mark the necessary four drilling holes at the mounting site. To this end, use the wall holder as a template.
• Drill the required holes and insert suitable dowels in the boreholes (B or special dowels).
• Screw tight the wall holder using suitable screws (A or screws matching the dowels) and washers (C).
Image 3
Depending on the location of the attachment points on the TV’s back, there are different mounting options.
VESA 75x75 or 100x100
• The mounting plate can be mounted directly to the back of the TV set without using the extension brackets.
VESA up to 600x400
• The mounting plate is mounted to the back of your TV set using the side and cross bars.
• Use the hexagon screws (D) included in the screw set provided to tighten the side and cross bars.
Make absolutely certain that the mounting plate is mounted in the centre of the TV set.
Image 4
• Fasten the mounting plate on the back of your TV set as shown in the first and second image using suitable screws
(E-J1) and washers (C or K) .
• During the installation, keep in mind that the straps of the mounting plate must face towards the TV’s upper side.
When fixing the mounting plate to the TV set, make absolutely certain that you use the correct
screws. Not only must these be of the correct thread type for the TV set, but they must also not
be too long; otherwise they will damage the TV set.
The screws must not be too short, however, since otherwise the connection will not be secure.
The screws must be screwed into the threaded fixture holes on the TV set with at least 5 full 360°
turns.
Should the screw length of the screws in the screw set provided will not be suitable for your TV
set, please acquire suitable screws at your local hardware store.
If you have any doubt about the correct length of the screws required, we recommend that you
contact the TV manufacturer or an appropriate specialist.
• Do not use any force when tightening the screws; otherwise the TV set may be destroyed, leading to loss of war-
ranty/guarantee!
Image 5
• Lift the TV set with the mounting plate and place it onto the wall holder from the top, as shown in the first image.
• The two straps of the mounting plate must be inserted into the slots on the wall holder.
• Secure the mounting plate on the wall holder using safety screws (1). Screw in the screws until the TV set can no
longer be removed from the holder.
• Adjust the desired inclination angle using the two lever screw connections. The levers on the screws can be pulled
outwards in order to be able to use the lever like a ratchet.
Maintenance and Care
The product does not have to be serviced and, except for occasional cleaning with a soft, dry cloth, requires no
maintenance whatsoever.
Never use aggressive cleaning agents or chemical solutions as these may damage the surface of the case.
Technical Data
TV size ................................... 66-140 cm (26-55”)
Load capacity ........................ max. 45 kg
VESA fixture .......................... max. 600 x 400
Wall distance ......................... 78-550 mm
Material .................................. Steel
O P E R AT I N G I N S T R U C T I O N S
Intended use
The TV wall holder is used for the mounting of suitable TV sets to walls.
The TV set may not exceed the values for TV size and weight specified in the section “Technical Data”.
Any use other than that described above will lead to the damage of this product or of the TV set. Furthermore, this
involves risks such as damage to furniture in close proximity to the wall holder, personal injury etc.
No part of the product may be modified or altered.
The safety instructions must be observed at all times.
Package content
See image 1 on the attached sheet of these operating instructions.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe these safety
instructions. We do not assume any liability for any resulting damage.
We shall not accept liability for damage to property or personal injury caused by incorrect hand-
ling or non-compliance with the safety instructions. In such cases, the warranty will be null and
void.
The exclamation mark symbol indicates that important information is included in these operating
instructions.
The arrow symbol indicates tips and notes
• A TV wall holder is not a toy. Keep the device out of the reach of children.
• Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
• Selecting an unsuitable installation location can lead to personal or material damage.
• Proceed with care when assembling and installing the product. The product may have sharp edges. There is a risk
of injury!
• Carry out only the work on the TV wall holder that is necessary in order to install it (or to adjust it). Never perform
any conversion or repair work.
• Before beginning the installation process, check whether there are appropriate mounting options for a TV wall holder
on the back of your TV set.
• Depending on the size and design of the TV set and TV wall holder concerned, it is sensible for a second person to
help with the installation. This person can hold the TV set still, for example, while you are attaching the TV set to the
wall holder.
• Apply your full concentration when carrying out the installation, because if the TV set and/or TV wall holder were to
fall, this could cause expensive damage to the equipment and there is the potential danger of personal injury!
• Lay all the TV set’s cables in such a way that they do not get jammed or kinked in the wall holder.
• Check all the screw fittings from time to time. Adjusting the position of the TV set and/or the wall holder and moving
them can sometimes cause the screws to become loose over time.
• Do not apply force when moving/adjusting the TV set or the TV wall holder. The TV set may get damaged from it.
• When moving/adjusting, do not press on the TV set’s screen.
• Do not overload the TV wall holder. Pay attention to the details provided by the manufacturer for the maximum TV
set weight and/or its size.
• Do not use the TV wall holder to support yourself or to hold onto.
• Do not fix any objects to the TV wall holder other than the TV set for which it was intended.
• In case of doubt, do not perform the installation yourself. Have an expert carry out the installation.
Installation
Wall-mounting is permissible only where the wall concerned is of the correct type and condition.
Lightweight partition walls or those made from gypsum boards are normally unsuitable. However,
specialist retailers do sometimes stock special dowel fittings for such installation locations. If
you are in doubt, ask a specialist before installation.
Depending on the base wall material (e.g. concrete), suitable mounting materials must be used
(screws, dowels, etc.). The dowel screws enclosed are only suitable for solid walls. Special dow-
els and screws are not normally supplied with the TV wall holder and they must be bought sepa-
rately, depending on the type and condition of the wall concerned.
Due to the weight of the TV set, TV wall holder and the lever action involved, ensure that the
screws are fixed securely.
Plan the installation location carefully, so that the TV wall holder with the TV set fixed to it will be
situated at the correct location (height and position) when you have finished the installation.
Pay attention when drilling and tightening the screws that no cable or pipes in the wall are dam-
aged. Inadvertently drilling through electric cables causes the life-threatening danger of an elec-
tric shock!
