Connection and getting started
Wall-mounting is permissible only where the wall concerned is of the correct
type and condition. Thin lightweight partition walls or those made from gyp-
sum boards with unstable substructures are normally unsuitable. However,
specialist retailers do sometimes stock special dowel fittings for such installa-
tion locations. If you are in doubt, ask a specialist before installation.
Depending on the base wall material (e.g. concrete), suitable mounting materi-
als must be used (screws, dowels, etc.). The dowel screws enclosed are only
suitable for solid walls. Special dowels and screws are not normally supplied
with the TV wall holder and must be bought separately, depending on the type
and condition of the wall concerned.
Due to the weight of the TV set, TV wall holder and the lever action involved,
ensure that the screws are fixed securely.
Plan the installation location carefully, so that the TV wall holder with the TV
set fixed to it will be situated at the correct location (height and position) when
you have finished the installation.
Pay attention when drilling and tightening the screws that no cable or pipes
in the wall are damaged. Inadvertently drilling through electric cables causes
the life-threatening danger of an electric shock!
Pay special attention to your safety when using electric tools (e.g. a drill). You
should also heed the safety instructions in the corresponding instructions.
Make sure no persons are in the area under the TV wall holder and/or the TV
set during the installation.
For this purpose, please observe the pictures in the mounting instructions enclosed.
Preparation of the TV set
• It is usually necessary to remove the TV set’s base before mounting it on a wall holder. Ob-
serve the operating instructions for your TV set.
•
Put the TV set flat on a soft and clean underlay, the display side facing downwards. Do not
apply pressure on the display. Protect valuable furniture surfaces during installation by using
a suitable underlay.
• Remove the existing base. Depending on the TV set, this base is either screwed tight or
clipped on.
Image 1:
• Unfasten the upper mounting nut and remove the lower mounting nut on the base plate.
• To this end, use the screw wrench (I) provided.
• Remove the base plate from the wall holder.
Image 2a (Mounting on cavity wall constructions):
• Select the position and the height of the wall holder at the mounting location. The fastening
holes on the mounting plate must be centred on the wood stud or another stable mounting
element of the wall construction. To define this position, e.g. a stud finder might be helpful.
Make sure you hold the wall holder in the correct orientation. The forked opening for
fastening the base plate must face upwards.
• Align the wall holder horizontally using a water level.
• Mark the necessary drilling holes at the mounting site. To this end, use the wall holder as a
template.
• Drill the required holes.
• Tighten the wall holder using four screws (W-A or other screws from the specialist shop suit-
able for the mounting surface) and washers (W-C).
The dowels enclosed (W-B) are not used for this mounting type.
Image 2b (Mounting on solid wall constructions):
• Select the position and the height of the wall holder at the mounting location.
The Make sure you hold the wall holder in the correct orientation. The forked
opening for fastening the base plate must face upwards.
• Align the wall holder horizontally using a water level.
• Mark the necessary drilling holes at the mounting site. To this end, use the wall holder as a
template.
• Drill the required holes and insert suitable dowels in the boreholes (W-B or special dowels).
• Tighten the wall holder using four screws (W-A or other screws from the specialist shop suit-
able for the mounting surface) and washers (W-C).
Operating instructions
TV wall holder 81-140 cm (32-55”) inclinable and
pivoting 30 kg
Item no. 2139969
Intended use
The TV wall holder is used for the mounting of suitable TV sets on walls. The TV set may not
exceed the values for TV size and weight specified in the section “Technical Data”.
Any use other than that described above will lead to the damage of this product or of the TV
set. Furthermore, this involves risks such as damage to furniture in close proximity to the wall
holder, personal injury etc.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• See page 2 in the mounting instructions provided.
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling
in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• A TV wall holder is not a toy. Keep the device out of the reach of children.
• Do not leave packaging material lying around carelessly. It may become a
dangerous play- thing for children.
• Selecting an unsuitable installation location can lead to personal or material
damage.
• Proceed with care when assembling and installing the product. The product may
have sharp edges. There is a risk of injury!
• Carry out only the work on the TV wall holder that is necessary in order to install it
(or to adjust it). Never perform any conversion or repair work.
• Before beginning the installation process, check whether there is an appropriate
mounting option for a TV wall holder on the back of your TV set.
• Depending on the size and design of the TV set and TV wall holder concerned, it
is sensible for a second person to help with the installation. This person can hold
the TV set still, for example, while you are attaching the TV set to the wall holder.
• Apply your full concentration when carrying out the installation, because if the TV
set and/or TV wall holder were to fall, this could cause expensive damage to the
equipment and there is the potential danger of personal injury!
• Lay all the TV set’s cables in such a way that they do not get jammed or kinked
in the wall holder.
•
Check all the screw fittings from time to time. Adjusting the position of the TV
set and/or the wall holder and moving them can sometimes cause the screws to
become loose over time.
• Do not apply force when moving/adjusting the TV set or the TV wall holder. The
TV set may be damaged by it.
• When moving/adjusting, do not press on the TV set’s screen.
• Do not overload the TV wall holder. Pay attention to the details provided by the
manufacturer for the maximum TV set weight and/or its size.
• Do not use the TV wall holder to support yourself or to hold onto.
•
Do not fix any objects to the TV wall holder other than the TV set for which it was
intended.
• In case of doubt, do not perform the installation yourself. Have an expert carry
out the instal- lation.
