2 port TOSLINK splitter
Item no.: 1230712
Version 10/14
© Copyright 2014 by Conrad Electronic SE.
V1_1014_02_HK
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
Intended use
This product is designed to split a digital audio signal into two digital audio signals. Optical Toslink cables are
connected to the input and outputs. A power adapter is included for providing power.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• 2 port Toslink splitter
• Power adapter
• 4 x rubber feet
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Also observe the safety and operating instructions of any other devices which are connected to the product.
• Only use the power adapter included when a mains socket is used as the power source.
• The mains socket that the device is plugged into must be easily accessible.
• Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging
in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage
of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on
the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket during storms.
• Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated could destroy the product. The plug-in power supply unit also involves danger to
life by electric shock! Allow the product to reach room temperature before connecting it to the power supply
and putting it to use. This may take several hours.
• If the wall plug transformer is damaged, do not touch it; there is danger to life from electric shock! First,
switch off the mains voltage to the mains socket to which the wall plug transformer is connected (switch off
at the corresponding circuit breaker or remove the safety fuse, then switch off at the corresponding RCD
protective switch, so that all poles of the mains socket are disconnected). You can then unplug the wall
plug transformer from the mains socket. Dispose of the faulty wall plug transformer in an environmentally
friendly way; do not use it any more. Replace it with a wall plug transformer of the same design.
• It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must
be avoided under all circumstances.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
Operating elements
OUT
A
B
POWER
IN OPTICAL
5 V/DC, 1 A
OUT
A
B
POWER
IN OPTICAL
5 V/DC, 1 A
Operation
• If needed, the rubber feet included can be attached to the bottom of the product.
• Turn off the all devices that you wish to connect before connecting the cables.
• An IN OPTICAL optical Toslink socket is available as a digital input. Connect a Toslink cable to the IN
OPTICAL Toslink socket and the Toslink socket on your playback device (e.g. DVD player).
• Connect suitable Toslink cables to the OUT A and B Toslink sockets and the Toslink sockets on your
playback device (e.g. amplifier).
• Connect the low voltage plug on the power adapter included to the 5V/DC, 1A socket on the Toslink splitter.
• Connect the power adapter to a suitable mains socket. The blue POWER LED indicator lights up.
• Turn on your amplifier and select the corresponding audio input.
• Turn on your playback device and begin playback.
Use Toslink cables with a maximum length of up to 5 metres to obtain loss-free transmission.
Maintenance and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
housing or even impair the functioning of the device.
• Remove the product from the power supply and the connected devices before cleaning.
• Under no circumstances should you service any of the components in the interior of the product, therefore
never open/dismantle it. Do not immerse the product in water.
• A dry, soft and clean cloth is sufficient for cleaning. Do not press too hard on the housing as this can lead
to scratch marks.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical Data
a) Toslink splitter
Operating voltage/current ..........................5 V/DC, 1 A
Digital audio input ......................................1 x optical (Toslink socket)
Digital audio outputs ..................................2 x optical (Toslink socket)
Supported audio formats ........................... S/PDIF digital audio, uncompressed 2-channel LCPM signal
(Linear Pulse Mode Modulation), compressed 2-channel and
multi-channel Dolby
®
and DTS Signal
Operating conditions ..................................0 to + 40 °C, 20 - 90 % RH (non-condensing)
Storage conditions .....................................-20 to + 60 °C, 20 - 90 % RH (non-condensing)
Dimensions (W x H x D) ............................52 x 26 x 42 mm
Weight .......................................................68 g
b) Power adapter
Operating voltage/current ..........................100 - 240 V/AC, 50/60 Hz, 0.18 A
Output voltage/current ...............................5 V/DC, 1A
