INDIVIDUAL ROBOT
ASSEMBLY for
HD1
Proceed to peg
pod/antenna assemble to
shoulder guard cover.
Larger two pegs attach to
HD1’s left side and smaller
pegs go to right side.
After removing robot from
packaging you will need to
attach each 8” antennas to
a shoulder pods as shown.
Antennas are
interchangeable and cannot
be removed after they are
attached to pod.
The two gun turrets plug onto
shoulders as shown.
Right arm gatling gun has wind-up
action. Turn clockwise to wind and
press release tab to spin
TS2
INDIVIDUAL ROBOT
ASSEMBLY for
INDIVIDUAL ROBOT
ASSEMBLY for
Load missile into hole
on right forearm pad.
Pull back and release to
fire
Jet packs plug into
either hole in back.
RL3
ASSEMBLY
INSTRUCTIONS PAGE 8
