4.2.4
Spot welding (TIG Punkt)
Spot welding in the device gives you an option to make short welds in a given time gaps. Using this
feature there are fewer parameters to be set: pre gas, welding current (
Is
), pulse balance, post gas
and a time gap between the welds. To conduct welding you need to press the torch button and hold it.
Device will provide short amperage impulses in a given time gaps e.g. if you set the time gap for 5
seconds and start welding you need to hold the button constantly and the device will provide amperage
impulses every five seconds.
5. Technical specification
