Spatz SDISCALE, Руководство по эксплуатации

Страница: 7 / 13

3
7. Operation Controls and Functions
7.1 Front Panel
1 2 3 4 5 6 7
1 . Power LED: This blue LED will illuminate when the device is connected with power
supply.
2. 3G LED: This green LED illuminate when the input SDI signal is with 3G
format.
3. HD LED: This green LED illuminate when the input SDI signal is with HD
format.
4. SD LED: This green LED illuminate when the input SDI signal is with SD
format.
5. MENU: Press this button to enter/exit the OSD menu.
6. ENTER: Press this button to confirm your selection. Press both ENTER and
– buttons together to switch output timing to 720p instantly and press with
+ buttons together to switch output timing to XGA.
7. -/+: Press these buttons to move up or down the OSD selections.
7.2 Rear Panel
1 2 3 4 5 6
1 . SDI IN: This slot is where you connect the SDI source output for SDI signal sending to
be display on screen.
2. SDI OUT: This slot is where you connect the SDI display with SDI cable for input
source display.
3. AUDIO OUT COAXIAL: This slot is where you connect the amplifier with coaxial
cable and from amplifier to speaker
4. AUDIO OUT R/L: These slots are where you connect the speaker or amplifier
with RCA jack for audio signal display.
5. HDMI Out: This slot is where you connect the HDMI / DVI display with HDMI
or HDMI to DVI cable.
6. DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet. Blue LED will illuminate when the power is ON.