Spartus EasyCUT 40E, Руководство пользователя

Страница: 19 / 24

USER’S MANUAL
EN
17
8. MAINTENANCE
WARNING!
Before performing any maintenance or repairing of device, it should be disconnect from the
power source and wait at least 5 minutes. The voltage accumulated in capacitors should be
discharged at this time to a safe level. But even after that operation you should be careful.
Maintenance and repair work may be performed only by qualified personnel with the appropriate per-
missions. Regular maintenance provides adequate service life and trouble-free operation of the device.
Daily (before each use/installation):
• Perform a visual inspection of the housing, knobs, control panel.
• Inspect (visual inspection) the power cord and power plug. Check the insulation of the cable.
• Check the condition of cables and their connectors. If cable insulation is damaged – replace
it. If connection is not tight – press the plug.
• Check if the cooling fan is working properly.
• Make sure that all vents are not obstructed.
• Check the elements blocking air preparation. If necessary, drain excess condensate
from the filters.
• Check the technical condition of the plasma torch and consumables.
At least once a month:
• Regularly remove dust from inside the machine using compressed air. The pressure should
be low enough so as not to damage small parts inside the device. If the dust level is high in
the workplace, clean the machine more often.
• Check the connection of internal electrical components. If anywhere the joints are not tight
– tighten them.
Once a year:
• You should send device to an authorized service center for an interim review.
9. ENVIRONMENTAL PROTECTION
The product must not be disposed of into an ordinary waste container. It is totally
forbidden to dispose of electric or electronic equipment marked with a crossed-
-out trash can symbol by throwing it into ordinary waste containers. According
to the WEEE directive (directive 2012/19/UE), binding within the European Union,
such products should be disposed of according to local regulations.
We hereby inform the client that, according to the regulations, each commodity
is burdened with waste disposal costs (WDC) according to charging rates valid for a given year.
Attention!
If using liquid to water-cooled torches, utilize it according to attached information.