USER’S MANUAL
EN
18
8.5 MAINTENANCE
Check the Welding Helmet regularly and automatic welding filter. Check the face seal and the
air nozzle for holes, cracks or other damage. Do not use the system until all worn or damaged
parts have been replaced.
8.5.1 Master filter and pre filter replacement
In case of a filter alarm indication please replace the prefilter. Please monitor the time between
filter alarms. If you feel the replacement interval becomes too short, which is at user’s discretion,
you are then recommended to replace the master filter and the pre filter.
8.5.2 Cleaning
Using a clean cloth moistened with soapy water, clean the blower, the air hose and the safety
helmet. Leave the unit to dry at room temperature. Do not use strong detergents, solvents, alcohol
or cleaning agents containing abrasives. The face seal is washable (hand wash, do not spin).
8.6 LIST OF SPARE PARTS
LP.
CODE
DESCRIPTION
1
080-15-001
HEPA main filter
2
080-15-003
Spark shield
3
080-15-004
Active carbon pre-filter
4
080-15-010
Lithium-ion battery
9. ENVIRONMENTAL PROTECTION
The product must not be disposed of into an ordinary waste container. It is totally
forbidden to dispose of electric or electronic equipment marked with a crossed-
out trash can symbol by throwing it into ordinary waste containers. According
to the WEEE directive (directive 2012/19/UE), binding within the European Union,
such products should be disposed of according to local regulations.
We hereby inform the client that, according to the regulations, each commodity is burdened
with waste disposal costs (WDC) according to charging rates valid for a given year.
