2.
On your mobile device, go to the appropriate app store and search for the “gowireless” app.
There are several; you want the one with an orange “go” on a white background, from
Frontier Pursuits Technology.
3. Download and install the app.
4. Launch the GoWireless mobile app. Read the quick tip, and then close it.
5. To connect the app to your account:
a. From the menu, tap Camera Management.
b. Tap + to open the authentication dialog.
c. Enter the Account ID and the Access Code (the admin code for your phone, guest code
for people who you don’t want controlling the camera)
d. Tap Add.
6. Return to the main screen. If your phone is connected to WiFi, your pictures should appear.
7. Check the following settings and change if appropriate:
a. Tap the Menu button.
b. Tap Mobile Settings.
c. Under When New Photo is Available, you will probably want Automatically Download set
to ON and Download Only When WiFi is Available set to OFF. If the WiFi setting is OFF,
photos will download regardless of whether you are on WiFi or not, but be aware that
photo downloads will use your device’s data allowance. Thumbnails are typically small,
but if you download a lot of them and/or a lot of hi-res photos, this may be a
consideration for you.
d. Set Photos
– Auto Purge Days to your desired value. This is how many days the photos
stay on your device unless you save them on your device.
GoWireless Auto Setup (Optional)
1. With the camera in SETUP mode and logged into the network, press the
Menu
button,
navigate to the
Wireless
tab and then to
Send Via
.
2. Choose
GoWireless Auto
.
3. Scroll down to
Recipients
, and then press the
OK
button.
4. With
selected, navigate to any entry box then press the
OK
button.
5. Use the keypad to enter up to four destination email address (es). This refers to both
regular email addresses and device email addresses in the carrier’s email format (e.g.,
[email protected], [email protected], [email protected], or
).
Press
Del
to backspace.
Use the arrow keys to navigate to the button containing the letter you want.
With the cursor on the button containing the letter, press the
OK
button multiple times to
get the letter you want. For example, to enter C, with the ABC button highlighted, quickly
press the
OK
button 3 times.
6. Highlight
Save
then press the
OK
button to exit.
7.
Image From:
enter the name for your camera that will appear in the
From
field on the
picture email. This will not appear on the info strip at the bottom of the photo.
8. Press
OK
to save your changes.
9. Press
Menu
to return to the main menu.
10. Set the other parameters (Camera, Trigger, System) using the information in the tables in
the User Guide. It is probably best to set the clock last.
11. Once you have set all the parameters, press
Menu
to return to the Preview screen.
12. Move the switch from SETUP to ON.
