INSTALLATION INSTRUCTIONS: Manual
Mulching Chute
STEP 1
•
Bolt the Chute Plate to the Chute Mounting
Bracket using the provided ¼” carriage bolts.
•
Align the holes of the plate to the
corresponding holes of the bracket and insert
bolts.
•
Secure with the provided nuts.
STEP 2
•
Locate the Spring Pin and matching nut from
the provided bolt kit.
•
Screw the nut onto the spring pin.
STEP 3
•
Insert the spring pin and nut into the
corresponding hole of the chute mounting
bracket as shown here.
•
Align one of the holes of the mounting bracket
with the corresponding spring pin hole and
screw it in enough that the plunger of the
spring pin is inserted into the aligned hole.
•
Over tightening of the spring pin could
cause it to snap.
NOTE: There may be some powder coat in the
threads of the bracket. It could be helpful to either
pre-tap the hole or use a small impact wrench to
screw the spring pin in.
