Spartan 1331, Руководство пользователя

Страница: 11 / 23

2. Front Post and Tension Control Knob Installation
Remove six M8x16 Bolts (41), six Ø8 Spring Washers (60), and six Ø20xØ8 Curve
Washers (42) from the Main Frame (1). Remove bolts with the S6 Allen Wrench provided.
Insert the Tension Cable (30) through into the bottom hole of Front Post (5) and pull it out
from the square hole of Front Post (5).
Connect the Sensor Wire II (68) from the Main Frame (1) to the Sensor Wire I (67) from the
Front Post (5).
Insert the Front Post (5) onto the tube of the Main Frame (1) and secure with six M8x16
Bolts (41), six Ø8 Spring Washers (60), and six Ø20xØ8 Curve Washers (42) that were
removed. Tighten bolts with the S6 Allen Wrench provided.
Remove the Ø20xØ5.2 Curve Washer for Tension Control Knob (64) and M5x25 Bolt for
Tension Control Knob (65) from the Tension Control Knob (54). Remove bolt with the Multi
Hex Tool with Phillips Screwdriver provided.
Put the cable end of resistance cable of Tension Control Knob (54) into the spring hook of
Tension Cable (30), see Figure A. Pull the resistance cable of Tension Control Knob (54)
up and force it into the gap of metal bracket of Tension Cable (30), see Figure B. Attach
the Tension Control Knob (54) onto the Front Post (5) with the Ø20xØ5.2 Curve Washer for
Tension Control Knob (64) and M5x25 Bolt for Tension Control Knob (65) that were
removed. Tighten bolt with the Multi Hex Tool with Phillips Screwdriver provided.
2 .