Spartan Tool SparVision 200, Руководство пользователя

Страница: 16 / 28

Page 16
The SparVision 200 is designed for easy maintenance and trouble free operation. Regular maintenance
will prolong the life of the product. Follow these simple procedures:
t
Do not store outdoors and do not allow the unit to sit for extended periods in a hot environment
such as a truck or automobile in bright sunlight.
t
Never operate in standing water.
t
After each inspection, always wash camera head,flex-link, and push-cable.
t
The connectors may accumulate dirt on the pins with prolonged system use. Use a cotton swab
impregnated in a drop of standard alcohol to clean them. Normally a clean pin inserted in the
receptacle will wipe the internal contact and make a good connection. If this does not suffice, a
drop of alcohol can be inserted in the bad contact hole to clean it.
t
Keep all connector threads clean to ensure proper tightness and mechanical connection.
t
Inspect the clean push-cable for damage such as peel off, deep scratches, cracks, kinks, or any
other signs of failure.
Caution: Never use a damaged push-cable even if the system appears to function properly.
Even the smallest drop of water that penetrates will eventually corrode the wires and
produce shorts and malfunctions. Do not use electrical or other type of tape to cover a
crack or tear in any push-cable of this system.
t
Wipe the camera lens cover clean with soft cloth. The cover is constructed of special scratch-
resistant, high-impact sapphire, and provides maximum transparency under adverse inspection
environment conditions.
Monitor position holding force is adjusted by
tightening/loosening of hinge crews.
Maintenance Maintenance
Maintenance Maintenance
Maintenance