Spartan Tool 75720010, Руководство по эксплуатации продукта

Страница: 25 / 44

25
Operating Instructions
CLEANING A DRAIN LINE
1 . Attach a suitable nozzle onto the high-pressure hose .
2 . With the hose reel out of gear (Position D, page 21), pull the hose through the
hose
guide
(6) to facilitate guiding the hose .
3 . The hose can be unwound short distances with the hydraulic hose reel out of gear .
4 . Put the nozzle into the drain to be cleaned (a minimum of 6 feet) .
5 . Rotate the
pressure regulator
(11) clockwise to increase pressure to the desired
value on the pressure gauge (12) .
6 . Open the
high-pressure valve
(7) .
7 . Depress the
high pressure on button
(35) .
• Water begins spraying out of the
nozzle at the end of the hose .
•
High pressure LED
(33) lights blue .
•
High Pressure On
is displayed on the
eController screen for 2 seconds .
• After 5 seconds,
Main Menu
is
displayed on the eController screen .
8 . Increase or decrease engine RPM by
turning the
Navigator dial
.
9 . The hose will now unwind and work its
way into the drain line .
10 . When possible, jet the drain line from
the low end to the high end of the pipe .
11 . Check for water draining away as an
indication that the blockage has been
cleared in the drain line .
12 . When the blockage has been cleared,
continue to flush the pipe while
rewinding the high-pressure hose .
11
12
6
7
33
35
Navigator dial