Spartan Equipment 75594, Руководство оператора и каталог запасных частей

Страница: 17 / 45

OPERATING INSTRUCTIONS
To dig a shallow trench, reach the desired depth by following the basic digging techniques
and then slowly back up the loader, keeping the bucket height constant.
To prevent serious personal injury or death from cave-in or vehicle overturn;
Always back away from trenches before turning.
Do not dig close to the loader wheels or under the loader.
The depth of the hole or trench will be controlled by dipper extension and loader arm height.
Use caution when working close to fences, ditches or on uneven ground and slopes. Always
dump a loaded bucket on the uphill side of the hoe to minimize the possibility of turnover.
Use the flat sides of the bucket to scrape off any high spots on the sides of the excavation.
WARNING!
BACKFILLING
There are several options available for backfilling a hole or trench. The spoil location and
job at hand will determine which procedure is best for your application.

Use the side of the bucket and pivot the loader toward the trench or hole or use the skid hoe
swing (if equipped) to PUSH the spoil into the trench or hole.

Use the bucket to reach beyond the trench and travel in reverse to PULL the spoil into the trench
or hole.

Use the back of the bucket and travel forward to PUSH the spoil into the trench or hole.
USE SIDE OF BUCKET TO
PUSH SPOIL INTO TRENCH
USE BUCKET TO PULL
SPOIL INTO TRENCH
USE BUCKET TO PUSH
SPOIL INTO TRENCH
10349 8-30-05
75594 15